Results foriec 60950 1 ingress test probefrom 9615 Products.
|
IEC 60335-2 Rigid Finger Test Probe 11 With Force 50N Product Information For Rigid Finger Test Probe 11: This rigid finger probe conforms to the standard requirement of IEC ...
|
|
|
|
Test Probe B , IEC61032-Figure 2 , IEC test equipment IEC61032 Figure 2, Diameter: 12mm Length:80mm Insulated portion: Ø50mm, 20mm wide,100mm long IEC61032 Equipment list No. Items ...
|
|
|
|
IEC 60529 IPX5 IPX6 Hose Nozzles Strong Water Spray Test Chamber Complied Standards & Clauses IEC60529:2013 “Degrees of protection provided by enclosure (IP code)” IPX5 & IPX6. ...
|
|
|
|
IEC 60065:2014 clause 9.1.1.3 Children Test Probe 18 Standard: Conforms to IEC 60065:2014 clause 9.1.1.3, IEC61032 figure 12 finger probe 18, IEC335.1,UL1017. Application: It is ...
|
|
|
|
IEC 60529 Sand Dust Test Chamber Environmental Test Equipment IEC 60529 Sand Dust Test Chamber Product information: The sand and dust test chamber is designed and manufactured ...
china
|
|
|
|
IEC 61032 Figure 2 Jointed Probe For Equipment And Persons Enclosures Protect Product information: The joint test probe of figure V.2 is in accordance with many standards like IEC ...
|
|
|
|
UL Standard / IEC 62368 -1-Figure V.1 Heat-treated steel Steel Jointed Test Probe Simulating Human Finger Movement Application: This jointed Test Finger Probe is strictly designed ...
|
|
|
|
IEC 61851-22 EVSE IPX9 High Pressure High Temperature Water Ingress Test Room Complied Standards & Clauses This walk-in IPX9K high pressure high temperature water jetting test room ...
|
|
|
|
IEC 60065 Test Probe D 1mm Diameter 100mm Length for HAZARDOUS LIVE TEST IEC60065 Clause 9.1 .4 TERMINALS The use of a single-pole plug or a bare wire to make connection with a ...
|
|
|
|
IEC 61032 Figure 7 Test Finger Probe To Verify Mechanical Strength IEC61032 Figure 7 Rigid Finger Probe To Verify Mechanical Strengthen Of Openings In The Enclosure Or Internal ...
china
|
|
|
|
IEC 61032 Figure 2 Jointed Standard Test Probe For Equipment Product information: The test finger probe B is intended to verify the basic protection against access to hazardous ...
|
|
|
|
IEC 60601-2-3-Figure 201. 102- Test probe
|
|
|
|
IEC 60065 Test Probe C 2.5mm Diameter 100mm Length for HAZARDOUS LIVE TEST IEC60065-2014 Clause 9.1 .5 Pre-set controls If a hole giving access to pre-set controls is marked as ...
|
|
|
|
Test Probe 11 with Dynamometer 75N Standards: Standard:it is designed and made according to IEC 61032 Figure 7, required by many standards such as IEC 60884-1:2013, IEC 60669-1: ...
|
|
|
|
IEC60950 Figure 3 Test Finger Probe Telecom Test Probe End radius with R6 Product presentation of Test Finger Probe: The Telecom Test Probe is a precision tool designed for ...
|
|
|
|
Test Probe B Standards: This is a precision test finger made in accordance with IEC 61032 figure 2, required by many standards such as IEC60884, IEC60335, UL507, and UL1278 figure ...
|
|
|
|
IEC 60529 IP Testing Equipment Test Probe C for IP3 and Protection against contact hazards Product Introduction for IP Testing Equipment: The 2.5mm test rod conforms to IEC61032 ...
|
|
|
|
IEC 61032 Test Probes Protection of Persons and Equipment by Enclosures-Probe for Verification Standards & Clauses: IEC61032:1997 “Protection of persons and equipment by enclosures...
|
|
|
|
IEC 60335-1 Clause 20.2 Similar to Test Probe B but Having a Ф50mm Circular Stop Face Standards & Clauses: IEC 60335-1 clause clause 20.2. IEC61032:1997 “Protection of persons and ...
|
|
|
|
IPX5 IPX6 Portable Hose Nozzle for Protection Against Water Jets Overview: The hose nozzle is used to verify the protective performance of the enclosure for electronic and ...
|
|
|
You may also be interested in :