Home Companies Sinuo Testing Equipment Co. , Limited

SS Electrical Appliance Tester IEC 60335-1 Clause 20.2 Similar To Test Probe B But Having A Ф50mm Circular Stop Face

Contact Us

[China]

Trade Verify

Address: Room 101, 1st Floor, No. 6, Third Street, Pingshan Industrial Zone 511495, Shibi Street, Panyu District, Guangzhou, China

Contact name:Zoe Zou

Sinuo Testing Equipment Co. , Limited

Verified Suppliers

Trust
Seal
Verified
Supplier
Credit
Check
Capability
Assessment

SS Electrical Appliance Tester IEC 60335-1 Clause 20.2 Similar To Test Probe B But Having A Ф50mm Circular Stop Face

Country/Region	china
City & Province	guangzhou guangdong
Categories	Terminals

Product Details

IEC 60335-1 Clause 20.2 Similar to Test Probe B but Having a Ф50mm Circular Stop Face

Standards & Clauses:

IEC 60335-1 clause clause 20.2.

IEC61032:1997 “Protection of persons and equipment by enclosures-Probe for verification”

IEC60529:2013 “Degrees of protection provided by enclosure (IP code)”

Samples and Restrictions:

Household appliances, electrical accessories, lamps, etc.

Application:

To verify

a) protection of persons against access to hazardous parts inside the enclosure；

b) protection of the equipment inside the enclosure against ingree of solid foreign object.

Test Principle:

The similar to test probe B of IEC 61032 but having circular stop face with a diameter of 50 mm is used to distinguish the different protection levels of the electrical enclosure. After the current or force is applied to the probe, whether the probe can contact the live parts or internal parts, to determines whether the specimen is qualified or not.

Structure:

This test finger probe consists of dito,finger,base and insulated handle which simulates the characteristics of the human hand. It has two movable joints, which can be curved at 90°.

Customizable: it can be used for anti-electric shock test when equipped with pluggable banana plugs and amphenol connector at the end of the handle, or used for enclosure protection test when open threaded hole of M6 at the end of the handle (connected with pull and push force gauge).

Technical Parameters:

Parameters /Model	SN2210-2 (Optional)	SN2210-2A	SN2210-2B (Optional)	SN2210-2T (Optional)
Name	Standard test finger	Circular baffle test finger	Large baffle test finger	Standard test finger with force
1	30±0.2	30±0.2	30±0.2	30±0.2
2	60±0.2	60±0.2	60±0.2	60±0.2
3	80±0.2	80±0.2	100±0.2	80±0.2
4	180±0.2	180±0.2	----	180±0.2
5	R2±0.05	R2±0.05	R2±0.05	R2±0.05
6	S4±0.05	S4±0.05	S4±0.05	S4±0.05
7	37^o 0 -10’	37^o 0 -10’	37^o 0 -10’	37^o 0 -10’
8	14 ^o 0 -10’	14 ^o 0 -10’	14 ^o 0 -10’	14 ^o 0 -10’
9	Ф12 0 -0.05	Ф12 0 -0.05	Ф12 0 -0.05	Ф12 0 -0.05
10	Ф50	Ф50	----	Ф50
11	20±0.2	----	----	20±0.2
12	Ф75±0.2	Ф75±0.2	Ф125±0.2	Ф75±0.2
13	5±0.5	5±0.5	----	5±0.5
14	----	----	----	10-50N force
15	IEC61032.1	IEC60335-1	IEC60335-2-14	IEC60529