|
[China]
Trade Verify
Address: Room 202, Building 4-2, No. 539, Shibei Industrial Road, Dashi Street, Panyu District, Guangzhou, Guangdong
Contact name:Tessa Huang
Guangzhou HongCe Equipment Co., Ltd. |
|
Verified Suppliers
|
|
|
IEC 60529 IP Testing Equipment Test Probe C for IP3 and Protection against contact hazards
Product Introduction for IP Testing Equipment:
The 2.5mm test rod conforms to IEC61032 figure 3 named test probe C and IEC60529 for IP3 and suffix C codes. It is used to verify the protection of persons against access to hazardous parts, also used to verify the protection against access with a tool.
The handle and stop face are made of nylon. The rod is made of stainless steel.
This probe has a terminal clamp to check the continuity during the test, also has a M6 threaded hole at the end of the handle, which can be equipped with a force gauge for force test.
Technical Parameters for IP Testing Equipment:
| Model | HT-I03 |
| Name | Test Rod Probe C |
| Rod Diameter (mm) | Ф2.5 |
| Rod Length (mm) | 100±0.2 |
| Rod Material | Stainless Steel |
| Stop Face Diameter | Ф35±0.2 |
| Stop Face Material | Nylon |
| Handle Diameter (mm) | Ф10 |
| Handle Length (mm) | 100 |
| Handle Material | Nylon |
| Standard | IEC60132 Figure 3 |
product structure diagram for IP Testing Equipment:
Product display (multi-picture):
Note: The voltage of the anti-shock probe experiment device is (40V-50V), the buzzer sound indicates the electric shock prompt.
