|
[China]
Trade Verify
Address: RM C, 13/F, HARVARD COMMERCIAL BUILDING, 105-111 THOMSON ROAD, WAN CHAI, HK
Contact name:Lynette Wong
Dongguan Kingpo Technology Limited |
|
Verified Suppliers
|
|
|
IEC 61032 Figure 7 Test Finger Probe To Verify Mechanical Strength
IEC61032 Figure 7 Rigid Finger Probe To Verify Mechanical Strengthen Of Openings In The Enclosure Or Internal Barrie
Products information:
This rigid finger probe conforms to the standard requirement of
IEC61032 figure 7 device 11,IEC60884,IEC60598,IEC60335,IEC60065. It
is used to verify the protection of persons against access to
hazardous parts, and to verify the mechanical strengthen of
openings in the enclosure or internal barriers. Customizable: It
can be used for anti-electric shock test when equipped with
amphenol connector. Or used for enclosure protection test when open
threaded hole of M6 at the end of the handle (connected with pull
and push dynamometer) .The probe whose model number is with "T" is
with force. There are two kinds of shell that can be chosen: the
nylon shell(for anti-electric shock test) and stainless steel
shell(for strength test) Main specification and corresponding
technical parameters:
Parameters /Model | HT-I07 | HT-I07T1 | HT-I07T2 |
Name | Test finger | Test finger with 50N force | Test finger with 75N force |
1 | 20 0 -0.05 | 20 0 -0.05 | 20 0 -0.05 |
2 | 80±0.2 | 80±0.2 | 80±0.2 |
3 | R2±0.05 | R2±0.05 | R2±0.05 |
4 | S4±0.05 | S4±0.05 | S4±0.05 |
5 | 37o 0 -10’ | 37o 0 -10’ | 37o 0 -10’ |
6 | 14 o 0 -10’ | 14 o 0 -10’ | 14 o 0 -10’ |
7 | Ф12 0 -0.05 | Ф12 0 -0.05 | Ф12 0 -0.05 |
8 | Ф50 | Ф50 | ---- |
9 | 5±0.5 | 5±0.5 | ---- |
10 | ---- | 0-50N force | 0-75N force |
Hot Tags: iec61032 rigid finger probe, China, manufacturers, suppliers, factory, custom, wholesale, Door Lock Aging Test, 100V200A Battery Charge-Discharge Tester, UL 60335-2-24 Figure 101.DVA.1 Articulate Finger, Cone Probe UL1278 Figure 10.1, Thermal Shock Test Chamber, Vertical Electromagnetic Vibration Table
