Hematology Reagents High Purity Reagents Hematology Reagent For
Mindray BC-5000, BC-5150 Analyzers
Intended Use
To be used for blood cell counting, sizing, and WBC
differentiation, hemoglobin determination on MINDRAY BC-5000,
BC-5150 hematology analyzers. This product is for In Vitro
Diagnostic Use only.
Procedures
- Remove all the reagent aspiration tubes from the currently used
reagent boxes or bottles.
- Wipe the tube’s surface with a lent free tissue, and then rinse
with distilled water. Put the tubes into the LABNOVATION reagent
boxes or bottles.
- Run at least 53 backgrounds. Check for the acceptable values. At
first high background counts can be seen, that should lower to
normal after a few runs.
- Run all three levels of a dedicated commercial control. Check for
the acceptable values.
- Recalibrate the unit if necessary.
Precautions
- Re-calibration is recommended when changing the origin of the
reagents.
- It is not recommended using different brands of solutions together
on one unit of analyzer.
- Do not ingest. Avoid contact with skin and eyes.
- Skin contact: Flush with plenty of water.
- Eyes contact: Flush with plenty of water. Obtain immediate medical
attention.
- This kit is for professionals and in vitro diagnostic use only.
Specification
L-52D | DILUENT 52D | 20 L |
L-52LH | LYSE 52LH | 100ml×4 |
L-52DIFF | LYSE 52DIFF | 500ml×4 |
L-001C | PB-CLEANER | 50ml×2 |
KIT COMPOSITION
DILUENT 52D | NaCl≤9.4%, Buffer≤1.6%, Anti-Microbial Agent≤1.0% |
LYSE 52LH | Quaternary Ammonium Salt<45g/L |
LYSE 52DIFF | Surfactant |
PB-CLEANER | Sodium Hypochlorite 5% |
APPLICABLE INSTUMENT
- For use with MINDRAY BC-5000, BC-5150 hematology analyzers.
Advantage
- One source for all brands of analyzer
- Reagents for both 3-parts and 5-parts
- Ready-to-use final products and bulk OEM reagents
- ISQ13485:2003 and ISO9001:2008 certified
- CE marked, FDA cleared
- Well-established brand used by thousands of lab in 95 countries
- High quality, high performance and high fidelity of correlations
with original brand.
Storage
- Store the product at 5-35℃ in a dust free place with good
ventilation. Temperature outside the range may damage the product.
- The open vial life of the product is 30/60 days. Unused reagents
should be discarded after 30 /60 days. Do not mix residual with a
new carton.