Hematology Reagent For Coulter Stks, Maxm, Hmx Analyzers High
Quality Adn Purity Reagents
Intended Use
To be used for blood cell counting, sizing, and WBC
differentiation, hemoglobin determination on MINDRAY
BC-6800,BC-6900,BC-6700,BC-6600 hematology analyzers. This product
is for In Vitro Diagnostic Use only.
Procedures
- Remove all the reagent aspiration tubes from the currently used
reagent boxes or bottles.
- Wipe the tube’s surface with a lent free tissue, and then rinse
with distilled water. Put the tubes into the LABNOVATION reagent
boxes or bottles.
- Run at least 50 backgrounds. Check for the acceptable values. At
first high background counts can be seen, that should lower to
normal after a few runs.
- Run all three levels of a dedicated commercial control. Check for
the acceptable values.
- Recalibrate the unit if necessary.
Precautions
- Re-calibration is recommended when changing the origin of the
reagents.
- It is not recommended using different brands of solutions together
on one unit of analyzer.
- Do not ingest. Avoid contact with skin and eyes.
- Skin contact: Flush with plenty of water.
- Eyes contact: Flush with plenty of water. Obtain immediate medical
attention.
- This kit is for professionals and in vitro diagnostic use only.
Specification
L-68DR | DILUENT 68DR | 1 L |
L-68DS | DILUENT 68DS | 20 L |
L-68LD | LYSE 68LD | 1L×4 |
L-68LB | LYSE 68LB | 1L×4 |
L-68LN | LYSE 68LN | 1 L×1 |
L-68FN | STAIN 68FN | 12mLX4 |
L-68FR | STAIN 68FR | 12mLX4 |
L-68FD | STAIN 68FD | 48mLX4 |
KIT COMPOSITION
DILUENT 68DR | Tricin buffer |
DILUENT 68DS | NaCl, Buffer, Anti-Microbial Agent |
LYSE 68LD | Non-ionic Surfactant |
LYSE 68LB | Non-ionic Surfactant |
LYSE 68LH | Sodium Phosphate, Diabasic |
APPLICABLE INSTUMENT
- For use with Mindray BC-6800,BC-6900,BC-6700,BC-6600 hematology
analyzers.
Advantage
- One source for all brands of analyzer
- Reagents for both 3-parts and 5-parts
- Ready-to-use final products and bulk OEM reagents
- ISQ13485:2003 and ISO9001:2008 certified
- CE marked, FDA cleared
- Well-established brand used by thousands of lab in 95 countries
- High quality, high performance and high fidelity of correlations
with original brand.
Storage
Store the product at 5-35℃ in a dust free place with good
ventilation. Temperature outside the range may damage the product.
The open vial life of the product is 30 days. Unused reagents
should be discarded after 30 days. Do not mix residual with a new
carton.