Hematology Analyzer Reagents Hematology Reagent For CD3200
Analyzers High Quality Rreagents
Intended Use
To be used for blood cell counting, sizing, and WBC
differentiation, hemoglobin determination on ABBOTT CD3200
hematology analyzers. This product is for In Vitro Diagnostic Use
only.
Procedures
- Using the function keys press the following menus:
MAIN-SPECIAL PROTOCOLS-REAGENT RESERVOIRE-EMTY DILUENT
- Remove the reagent inlet tube from the Diluent.
- Wipe the tube’s surface with a lent free tissue, and then rinse
with distilled water.
- Put the reagent tubes into the boxes and/or bottles of Labnovation
reagents.
- Using the function keys press the following menu:
FILL DILUENT
This step will fill the reagent system with Labnovation reagent.
- Repeat steps 1-5 with Lyse and Sheath.
- Run at least 5 backgrounds. Check for the acceptable values.
- Run all three levels of a dedicated commercial control. Check for
the acceptable values.
- Recalibrate the unit if necessary. (MAIN-CALIBRATION-ENTER-FACTOR)
Precautions
- Re-calibration is recommended when changing the origin of the
reagents.
- It is not recommended using different brands of solutions together
on one unit of analyzer.
- Do not ingest. Avoid contact with skin and eyes.
- Skin contact: Flush with plenty of water.
- Eyes contact: Flush with plenty of water. Obtain immediate medical
attention.
- This kit is for professionals and in vitro diagnostic use only.
- Never put distilled water on the analyser (except clean for
shipping menu), otherwise the pneumatic unit can be damaged
seriously.
Specification
L-8547196 | RET STAIN | 380 ML |
L-8547197 | RET LYSE | 1900 ML |
L-8546983 | LYSE DIFF | 1 L |
L-8546733 | ISOTONIC DILUENT | 20 L |
L-8546930 | E-CLEANER | 5 L |
KIT COMPOSITION
RET STAIN | New Methylene Blue 0.06% |
RET LYSE | Sulfuric Acid 0.15% |
LYSE DIFF | Quaternary Ammonium Salt<10%, Sodium Lauryl Sulfate<1.5% |
ISOTONIC DILUENT | NaCl≤9.4%, Buffer≤1.6%, Anti-Microbial Agent≤1% |
E-CLEANER | Buffer<0.3%, Proteolytic Enzyme<0.2% |
APPLICABLE INSTUMENT
- For use with CD3200 hematology analyzers.
Advantage
- One source for all brands of analyzer
- Reagents for both 3-parts and 5-parts
- Ready-to-use final products and bulk OEM reagents
- ISQ13485:2003 and ISO9001:2008 certified
- CE marked, FDA cleared
- Well-established brand used by thousands of lab in 95 countries
- High quality, high performance and high fidelity of correlations
with original brand.
Storage
- Store the product at 5-35℃ in a dust free place with good
ventilation. Temperature outside the range may damage the product.
- The open vial life of the product is 30/60 days. Unused reagents
should be discarded after 30/60 days. Do not mix residual with a
new carton.