72 Fibers Branch Fiber Optic Jumper Breakout SC / APC - SC / APC For High Density Use

72 Fibers Branch Fiber Optic Jumper Breakout SC / APC - SC / APC For High Density Use

The branch fiber cable is a cable that can be divided into several small optical cables at any position. Therefore, the branch optical fiber cable should be coded to facilitate the identification. The branch fiber cable is most convenient when it is used, because each fiber has its own sheath and aromatic amide strengthening element. So each fiber is very strong and durable. Breakout branch cable is the preferred method of direct termination. One layer of aramid preserver is encoded by the fiber subunit and is then wrapped in a layer of FRNC/LSNH sheath. A single subunit forms a cable and is wrapped in a flame-retardant FRNC/LSNH sheath. Each fiber uses tight buffer layer technology or double tight buffer layer technology, and the anti peeling ability of the fiber is very good. Each optical cable is designed with a tight buffer layer and a separate reinforcement. In this way, the cable terminal can be stitched directly, do not need to use distribution parts or splicing panels. Because the use of the Kevlar to increase strength of the branch fiber optic cable, and the cable will be heavier and the size is bigger. The branch optical cable is a very strong cable design for short network. This may include LAN, data communication, video system, and process control.

The typical application area of the branch optical fiber cable is indoor application: between the two electronic equipments or between fiber patch panel and frames of two electronic equipments.

The branch optical fiber cable is used to load the fiber directly connected to the device instead of connecting to the fiber patch panel. The branch fiber cable is composed of two or more single core or bundle cable, a reinforced component and a central component, and external sheath. The cable is the perfect choice when laying on exposed pallets or in any application area that requires more rigid and directly connected fiber cable to equipment. The optical cable is also suitable for the optical fiber assembly of the pre-installed terminal equipment, Fiberall’s multi-cores or multi-fibers fiber optic jumper (fiber patch cord) can be used the mentioned branch fiber cable with many subunits and it is ideal for high density application requires big capacity and direct connection.

Specification Of Branch Patch Cord