Ethernet To Fiber Media Converter With One SC Optical Interface And Two RJ45 Ports

FAFS-FDSES1R2-15, 10/100Base-TX To 100Base-FX Ethernet To Fiber Media Converter With One SC Optical Interface And Two RJ45 Ports

How to connect switches, routers, and firewalls? Generally speaking, routers are the first step of LAN, and the firewall between internal network and router is used to filter illegal entries. Next, we need to connect switches or fiber media converter. Note that many Internet providers are now providing optical services (FiOS), so you need to use a modem before the firewall to convert digital signals into electrical signals which can be transmitted through the Ethernet cable. So a typical connection in turn is the Internet- modem - router - Firewall - switch or fiber media converter, and then the switch is connected to other network devices.

Switches or fiber media converter can enable internal LAN communications, routers connect you to the Internet, and firewalls protect your network. So these three devices are indispensable in the network. In addition, Fiberall is able to supply high performance, high security and intelligent switches, these switches can not only provide higher density ports and more flat network architecture, but also meet the needs of large-scale data center access server, meanwhile improve network stability, realize load balance of data link, and do unified management for the whole logic unit.

Main Features

1, Support IEEE 802.310 Base-T, IEEE 802.3u 100 Base-TX/FX standards;

2, Support the 1K MAC address table;

3, Support IEEE 802.3X full duplex and half duplex back pressure flow control;

4, Support MDI/MDI-X parallel wires and cross wires automatic switching;

5, Support maximum transmission packet length 1552/ 1536 bytes (optional);

6, Complies with FCC, 15 CLASS A, CE standards and authentication.

Main Parameters Of Fast Media Converter