|
[China]
Trade Verify
Address: No.4 Building , No.388, Kongjiang Road,Yangpu District,200093,Shanghai,China
Contact name:Emily
Shanghai Wind Automation Equipment Co.,Ltd |
|
Verified Suppliers
|
|
|
Suitable Winding Machine For New Start Product Small BLDC 50W-500W Motor WIND-BLDC-2
(1) Application
This needle winding can wind both inslot stator and outrunner stator,
with four axis Yaskawa Servo Motor ,winder is flexible in movement,
the actions winding,crossing, wrap, and slotting, cutting are done automatically
(2) Advantages
1. By moving up and down the nozzle and rotating the stator core, it can be wound in any track.
Therefore, by changing the computer winding procedure,
the windings can be adjusted to stators with different core stack height and different slot no.
2. Any operation abnormality and fault status are prompted to
operate and maintain in human-machine
dialogue mode.
3. The number of stitching feet can be set arbitrarily by thread,
and the specified 360 degree position
can be stopped, which makes the threading simple,convenient and shortens the overall production time
4. When winding, the number of coils in each layer can be flexibly changed to achieve the
winding arraying mode of different stator types.
5. Product programming is simple and convenient, with unique dedicated software,
unlimited upload and download storage. Easy to master with simple training.
6. Since the in-line slotting action is performed by the
high-performance control system and
the Yaskawa servo motor, the stability of the position of the in-line enameled wire
is ensured and the time is shortened.
7. Each unit has been standardized, easy to replace and easy
to disassemble.
8. All the toolings are very easy to be changed within 1 minutes expect
(3) Parameter
Prouduct name: | |
Wire Dia.: | f0.10mm～f1.0mm |
Winding speed: | 50-600 r/min |
Winding method: | needle winding |
Stator stack length: | 10mm～100mm (0.39'' ~ 3.94'') |
Stator ID: | Φ36mm～Φ60mm |
Stator OD: | Φ10mm～Φ120mm ( 0.39'' ~ 4.72'') |
Pole no: | 2,4,6,8,12, 24, 36 |
Air pressure: | 0.5MPa～0.7 MPa |
Voltage: | 380V/50HZ ,Three-phase four-wire |
Power: | 7KW |
Dimension: | 1000(W)×800(D)×1,600(H)mm |
Weight: | about1200Kg |
Below samples are needed for machine manufacturing and commissioning:
1. Stator stack 5pcs without winding
2. Wound stator 1pc
3. Copper wire 1 roll enough for winding 15pcs stators
Please click below video to watch machine working
