|
[China]
Trade Verify
Address: No.4 Building , No.388, Kongjiang Road,Yangpu District,200093,Shanghai,China
Contact name:Emily
Shanghai Wind Automation Equipment Co.,Ltd |
|
Verified Suppliers
|
|
|
How To Produce BLDC Motor With Winding Machine Wire Broken Alarm WIND-3A-TSM
Application:
Needle winding BLDC stators of Sewing Machine,Air conditioning compressor, Refrigerator
compressor,water pump automotive application , fuel pump motor with 6 poles, 9 poles, 12 poles or
18 poles
Advantages:
Fast as three head winding
machine |
3 needles wind 3slots at same time,
wider can finish the winding in3 times for 9poles BLDC stator
|
Winding Range |
3 phase BLDC motor with same winding way for each phase,
Especially suitable for thick wire diameter around 0.8mm (AWG20)
|
Wire Broken Alarm |
With wire broken alarm device, in the case of wire broken during winding, the operator can easily know and don't have to observe even the situation of wire broken is rarely during winding motor for sewing Machine,air conditioning compressor, refrigerator compressor,water pump automotive application,fuel pump
|
Feature:
Brushless motor stator winding machine WIND-3A-TSM is designed to produce multi poles 3phase stator
Its winding track is in square shape,It does wires winding and arraying at same time and automatically.
The slots needle winding, arraying,indexing,place bridge wire,cut wires are fully automatically.
Parameter:
Wire diameter:0.08~1.2mm (AWG17~AWG39)
Stator ID:15~65mm
Core length:7-110mm
Turns No.0-99999
Operation option: stepping/Auto
Stator poles: 6 poles, 9 poles, 12 poles,18 poles (Customized)
Air pressure:5~7kg/square centi-meter
Power:2KW, AC220V 50/60Hz
Weight: about 450kgs
Dimension: 1600(L)x1100(W)x1400(H)mm
Question and Answer:
1. Which type of stator needle winding shall we select for our stator in attached drawing?
Per your winding data Number of turns 27, wire diameter 0.8mm,
the winding speed we suggest is 300RPM, and it take about 1mintutes to get 1pc wound stator,
In one hour you can get more than 60pcs
3. What's the material list we shall provide for machine trail?
Below samples are needed for machine manufacturing and commissioning:
1. Stator stack 5pcs without winding
2. Wound stator 1pc
3. Copper wire 1 roll enough for winding 15pcs stators
Please click below picture to view video
