Philip GOLDWAY GS10 Patient Monitor 110V - 240v White Color

Philip Goldway GS10 Patient Monitor Bedside Monitor

Philip GOLDWAY GS10 Patient Monitor Bedside Monitor Hospital Medical Equipment In Good Working Condition

►Brief Introduction

The Philip Goldway GS10 patient monitor is a medical device used to monitor various physiological parameters of patients in healthcare settings. The monitor consists of a host, a battery, a bracket, an ECG cable, a blood pressure cuff, a blood oxygen probe, a temperature probe, and a carbon dioxide measurement component. It is designed to provide accurate and continuous measurements of vital signs such as heart rate, blood pressure, oxygen saturation levels (SpO2), temperature, and respiratory rate. The monitor usually features a display screen that shows real-time data and alerts healthcare providers in case of any abnormalities or emergencies. The GS10 monitor is portable, compact, and user-friendly, making it suitable for various clinical settings such as hospitals, clinics, and ambulatory care.

► How To Use

1. Before turning on the power, check the monitor and all external leads, sockets and accessories for signs of damage.

2. The AC power supply meets the specifications. Using the supplied AC power cord, plug one end into the monitor's AC power outlet and the other end into a grounded single-phase power outlet. When the AC power is properly connected, the AC power indicator on the front panel is solid green. If the internal battery is used for power supply, ensure that the battery power is sufficient. At this time, the battery indicator on the screen is full.

3. Connect the monitor to the equipotential grounding system. One end of the equipotential grounding cable is connected to the potential equalization terminal on the rear panel of the monitor, and the other end is connected to a point on the corresponding equipotential grounding system.

4. Before each use of the monitor, verify that the alarm system is functioning. The operator can unplug the ECG cable or blood oxygen probe that connects the human body to the monitor. At this time, the monitor screen will display the "electrode off" or "probe off" alarm message, the monitor will sound an alarm, and the alarm light will indicate correctly. To further detect the alarms of individual measurement items, you can measure them yourself or use a simulator (such as SPO2). Adjust the alarm limits and check whether this triggers the correct alarm response.

5. Connect the accessories correctly and check all settings of the monitor, such as patient type, alarm limits, etc., to ensure that the monitor is in good working condition and that all functions can meet the technical requirements mentioned in this manual.

6. Press and hold the power/standby button on the front panel of the monitor for more than 3 seconds to turn on the monitor. After the system performs self-test, you can enter the main monitoring interface. The power-on/off indicator light on the front panel is solid green. The monitor enters the monitoring state and can monitor vital signs, process and communicate data.

► Product configuration

► Contact us

We provide wide range of medical equipment’s to help medical professionals, healthcare institutions, biomedical engineers, administrators, technicians reduce capital cost.

If you want to know more information about our company or products, or if you have any good suggestions for our products and services, or if you are unclear about our warranty period, please kindly contact us.

Thank you for your cooperation. Looking forward to establishing a long-term good cooperative relationship with you.

► FAQ

Pls contact us , if you are interested in Philip GOLDWAY GS10 Patient monitor Bedside Monitor.