Philip Goldway UT4000F Patient Monitor Main Board ML 94V-0 E211079 Patient Monitor Parts

Philip Goldway UT4000F Patient Monitor Main Board ML 94V-0 E211079

Philip Goldway UT4000F Patient Monitor Main Board ML 94V-0 E211079 Patient Monitor Parts

► Brief Introduction

The Philip Goldway UT4000F Patient Monitor Main Board ML 94V-0 E211079 is a main circuit board used in the Philip Goldway UT4000F Patient Monitor. This main board is responsible for controlling and processing data from various monitoring parameters such as ECG, SpO2, NIBP, and temperature. It also manages the user interface and provides real-time information to medical professionals for patient monitoring and healthcare decision-making.It is responsible for processing and displaying the vital signs and other information of the patient. The main board is a critical part of the monitor and is essential for its proper functioning.

► How To Use

Ensure that you have all the necessary components to assemble the patient monitor, including the main board, display screen, power supply, and other peripheral devices.

Begin by connecting the display screen to the main board using the appropriate cables. Ensure that the connections are secure.

Connect the power supply to the main board. Make sure to use the correct voltage and plug type as specified in the user manual.

Once all the connections are in place, turn on the power supply and switch on the patient monitor.

Familiarize yourself with the user interface of the patient monitor. This may involve reading the user manual provided by Philip or undergoing training specific to the device.

Customize the settings of the patient monitor according to your requirements. This may involve selecting the measurement parameters, alarm thresholds, and display options.

Ensure that the patient is properly connected to the monitor. This may involve attaching sensors or electrodes to the patient's body or blood pressure cuff.

Monitor the patient's vital signs and observe the readings on the display screen. Ensure that the readings are accurate and within the expected range. If any abnormalities occur, follow the appropriate medical protocols.

Regularly calibrate and maintain the patient monitor as per the manufacturer's recommendations. This may involve software updates, cleaning, and periodic inspections.

When the monitoring is complete, power off the patient monitor and disconnect the power supply. Properly store all the components and cables to maintain their longevity.

► Specification

Pls contact us, if you are interested in Philip Goldway UT4000F Patient Monitor Main Board ML 94V-0 E211079 .