Results foripx5 ingress protection test equipmentfrom 93729 Products.
|
|
IP5 IP6 Sand and Dust Environmental Test Chamber For Enclosure Protection Standard : IEC60529-2001: Degrees of protection provided by enclosure (IP code), Fig 2 IEC60598-1-2008 and ...
|
|
|
|
|
■ Description of IPX3 IPX4 Test Equipment IP 1000mm IPX3 IPX4 ingress protection test equipment is strictly designed according to IEC60529. It’s applied to the Electrical equipment ...
|
|
|
|
|
IEC 60529 IPX7 Temporary Immersion Water Ingress Testing Equipment Complied Standards & Clauses IEC60529:2013 “Degrees of protection provided by enclosure (IP code)” IPX7. ...
|
|
|
|
|
IP Test Equipment Access Probes For The Tests For Degrees Of Protection By IP1X To IP4X Standard: IEC 60529 Degrees of protection provided by enclosures (IP Code) IP1X, IP2X, IP3X, ...
|
|
|
|
|
IEC60529 IP Code Degrees Ingress Protection IPX1 To IPX8 Test System Product Introduction: The water-proof testing equipment is manufactured in accordance with the standard of ...
|
|
|
|
|
Oscillating Tube Tester for IPX3 and IPX4 HH0802 Description: This is to testing of IPX3 and IPX4 protection aginst water of electronic appliances, lamps, electrical cabinets, ...
|
|
|
|
|
■ Description of IPX3 IPX4 Test Equipment IP 1000mm IPX3 IPX4 ingress protection test equipment is strictly designed according to IEC60529. It’s applied to the Electrical equipment ...
|
|
|
|
|
IP Test Equipment Access Probes For The Tests For Degrees Of Protection By IP1X To IP4X Standard: IEC 60529 Degrees of protection provided by enclosures (IP Code) IP1X, IP2X, IP3X, ...
|
|
|
|
|
IPX7/IPX8 Immersion and Water Tightness Pressure Tester Standard IEC60529 degree of protection provided by enclosures (IP Code) of the IPX7 IPX8, IEC60884-1, IEC60335-1, IEC60598-1...
|
|
|
|
|
IP55 IP64 IP68 Sand Dust Water Ingress Protection IP Testing Equipment for Motor Description of IP Testing Equipment IP55 IP64 IP68 Sand Dust Water Ingress Protection IP Testing ...
|
|
|
|
|
1000L IPX1234 Waterproof Degrees Test PLC Control Tester For Electrical And Electronic Products Product Introduction This equipment is suitable for the test of electrical products ...
|
|
|
|
|
IPX8 Water Tightness Pressure Tester HH0806 Description: Assessment of enclosures and sealing element whether can ensure good performance of equipment and components after the ...
|
|
|
|
|
Test Sphere Probe , Test Finger Probe IEC61032 Fig.1 With Force Of 50N Product information: It conforms to the standard requirements of IEC61032 fig.1, IEC60529 IP1 and IEC60065. ...
|
|
|
|
|
Test Sphere Probe HT-I01 Description: This probe is intended to verify protection the back of hand of persons against access to hazardous parts. It is also the necessary probe used ...
|
|
|
|
|
UL Water Spray Test Apparatus HH0809 Description: This equipment is a device intended for use in wet locations shall be subjected to the test described in 24.2 and 24.3. Water ...
|
|
|
|
|
ISO16750.4 Clause 5.4 Road Vehicles Water Splash Test System Splash 3s Under 0-4°C To Simulated Environments A. SYSTEM introduction : It conforms to ISO16750.4clause 5.4 :Ice water ...
|
|
|
|
|
IEC60529 Tiltable Rotating 600mm Stage With Independent Control Box 150KG Adjustable Height Product Introduction The rotating table is manufactured in accordance with the standard ...
|
|
|
|
|
IEC60529 Figure 5 Handheld Brass Spray Nozzle Tester For IPX3 IPX4 121 Holes Product Introduction The HT IPX3/4 Spray Nozzle is a hand-held test device to verify protection against ...
|
|
|
|
|
IEC60529 IPX3 / IPX4 PLC Control 0.4mm Needle Hole Oscillating Tube Open Type Tester Product information: Oscillating tube tester is designed and manufactured in accordance with ...
|
|
|
|
|
IEC60884-1 IPX8 Water Tightness Pressure Tester Pressure Adjustment Rang 0 ~ 6bar Product Introduction The IPX8 Water Tightness Pressure Tester is manufactured in accordance with ...
|
|
|
You may also be interested in :
