Home Companies Sinuo Testing Equipment Co. , Limited

IPX7 Water Ingress Protection Test Equipment IEC 60529 Temporary Immersion

Contact Us

[China]

Trade Verify

Address: Room 101, 1st Floor, No. 6, Third Street, Pingshan Industrial Zone, Shibi Street, Panyu District, Guangzhou, China

Contact name:Zoe Zou

Sinuo Testing Equipment Co. , Limited

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

IPX7 Water Ingress Protection Test Equipment IEC 60529 Temporary Immersion

Country/Region china
City & Province guangzhou guangdong
Categories Optical Instruments

Product Details

 

 

IEC 60529 IPX7 Temporary Immersion Water Ingress Testing Equipment

 

Complied Standards & Clauses


 

IEC60529:2013 “Degrees of protection provided by enclosure (IP code)” IPX7.

 

Equipment Overview


Samples and Restrictions: Electrical and electronic products, automobiles, motorcycle parts, communication products, household appliances, outdoor lighting and signal devices, etc.

 

Structure: The test chamber is made of stainless-steel frame, and transparent transparent thickened tempered glass. The basket lifting is driven by electric hoist, which is convenient for operation.

 

Application: To verify the protective performance of the enclosure for electronic and electrical products, automobiles, motorcycle parts, household appliances, seals and lamps under temporary immersion in water at degree IPX7.

 

Principle: By controlling the depth of the sample in the water to achieve a standard equivalent pressure, to produce water pressure across the entire surface of the specimen enclosure.

 

Use Environment:

Use place: temperature 15-35 ° C, relative humidity 25%-75%, atmospheric pressure 86 ~ 106kpa (860 mbar -1060 mbar), there should be equipped with lighting, the ground needs to be flat, and the water intake and drainage function should be good.

Water source: clean water or tap water without impurities, equipped with water cleaning filter.

 

Technical Parameters


Control & OperationPush-button operation
Chamber Size

Inner chamber: WDH=800×800mm×1200mm

Outer chamber: WDH=860×860mm×1800mm

Or can be customized

Highest Water Depth

1200mm, with a scale, the resolution of scale is 1mm

Or can be customized

Basket SizeStainless steel basket: WD=500×500mm
Lifting ControlDriven by electric hoist
Test Duration30min, manually controlled
MaterialStainless steel frame, tempered glass
 

Hot Products

IEC 62196 Fig12 EV Connector Clamping Screw Terminal Testing Equipment Complied Standards & Clauses ...
IEC62196 EV Switch Socket Interlock Withdraw Force Test Apparatus Complied Standards & Clauses for ...
IEC62196 Electric Vehicle Charging Interface Insertion Force Test Device Complied Standards & ...
EV Connector Testing Equipment Dust-proof Test Chamber Complied Standards & Clauses This test ...
IEC 60390 Electric Vehicle Charging Plug And Socket Cable Flexing Test Apparatus Complied Standards ...
IEC62196 Electric Vehicle Charging Plug and Socket Withdrawal Insertion Force Test Equipment ...