|
[China]
Trade Verify
Address: Room 202, Building 4-2, No. 539, Shibei Industrial Road, Dashi Street, Panyu District, Guangzhou, Guangdong
Contact name:Tessa Huang
Guangzhou HongCe Equipment Co., Ltd. |
|
Verified Suppliers
|
|
|
IEC60529 IPX3 / IPX4 PLC Control 0.4mm Needle Hole Oscillating Tube Open Type Tester
Product information:
Oscillating tube tester is designed and manufactured in accordance with the standard requirement of IEC60529 IPX3 and IPX4,IEC60335-1 clause 15.1. It is used for the waterproof test of the electrical equipment.
The oscillating tube part of this device is controlled by adjustable-speed motor and crank-link mechanism. This device is reciprocating swing from the place of ±60°to another one of ±175°with the speed required by the standard through machine adjusting angle.
The angle adjustment is accurate. The structure is stable and durable. It is equipped with rotating stage through which the rotating of 90°can be achieved. It is also equipped with clean water filtration unit to prevent the pinhole from jamming.
Technical parameters:
| No. | Item | parameters |
| 1 | Water supply | Water flow rate＞10L/min±5% clean water without inclusion. This device is equipped with clean water filtration unit |
| 2 | The size of the oscillating tube | Come with R200, R400, R600, R800, R1000, R1200, oscillating tube (R1400,R1600mm can be optional), stainless steel |
| 3 | Water hole | Φ0.4mm |
| 4 | Included angle of two holes | IPX3:120°; IPX4:180° |
| 5 | pendulum angle | IPX3:120°; IPX4:360° |
| 6 | Raining speed | IPX3:4s/time(2×120°); IPX4:12s/time(2×360°); |
| 7 | Water flow | Can be set according to the size of the pendulum and the number of the pin holes (0.07 L/minX per hole) |
| 8 | Testing time | 0.01S～99 hours 59mins,can be preset |
| 9 | Pressure gauge | 0~0.25MPa |
| 10 | Site requirements | Dedicated IP waterproof test room, The ground should be flat with illumination 10A waterproof leakage switch(or socket)used for equipment. With good function of inflow and drainage. Ground installation |
| 11 | The area | According to the oscillating tube chose |
Main configuration:
| No. | Name | Specifications | Quantity | Remarks |
| 1 | Oscillating tube | R1000,R1400 | 1 | Configuration |
| 2 | Oscillating tube drive | Stainless steel cover,Worm gear reducer drive | 2 | There are one high and low pressure drive shaft and tailstock, high-axis for large swing tube, low shaft is for the small swing tube. |
| 3 | Support the tailstock | Industrial Molding Aluminum | 1 | |
| 4 | Servo motor | 750W,Matsushita Electric Works | 1 | |
| 5 | Rotating water head | 1/2″ | 1 | |
| 6 | Water spray needle seat | M5 cone seat,Stainless steel | 240 | Includes spare needle holder |
| 7 | Stainless steel needle mouth | φ0.4mm | 240 | Includes spare needle tip |
| 8 | Blocking head | Sealed ball | 50 | Spare parts |
| 9 | Angle indicator | 0-360° | 1 | |
| 10 | Ball valves | 1/2″,Exclude stagnant water | 1 |
