Double Triple Glass Vertical 15mm Insulating Glass Production Line

Vertical Insulating Glass Production Line that Applicable to produce double glass, triple glass
 

A.The machine adopts Siemens control system with high resolution touch screen. The operator

can modify the working parameters of the production line at any time, and can clearly show the

state of each input and output signal to facilitate the daily maintenance of the machine.

B. The machine is divided into manual and automatic control mode.Each section can be controlled

separately, easy and concise.

C. LJBZ2535G vertical insulating glass production line includes:

• LJBZ2535G loading section
• LJBZ2535G washing&drying section
• LJBZ2535G discharging section
• LJBZ2535G inspection and frame installation section
• LJBZ2535G flat press lading section
• LJBZ2535G glass pressing section
• LJBZ2535G flat press discharging section.

LJBZ2535G loading section is inclined vertical structure. The transmission roller is wear-resistant,

acid and alkali polyamine grease roller, adopting the stepless frequency conversion speed

regulation and the glass can run smoothly at the appropriate speed.The foot switch can according

to the work situation start and stop transmission at any time. The low-e detection and alarm

system can accurately detect whether the coating surface of the coated glass is properly placed.

If not, the buzzer alarm is reported and the transmission is stopped.

The special structure inside the washing machine can automatically recognize glass thickness.

Allowing different thicknesses of glass to be transferred quickly, increasing production speed.

According to the test, it takes only 22s to produce a 1m*m insulating glass.

1). There is a universal joint device, when the glass thickness was changed, the wind knife will

move forward and backward to adjust the distance so that the relative distance between the

wind knife and the glass is constant, so as to avoid damage to the glass due to the changes

of the glass thickness.

2). There are chain gears on both sides of the bottom of the glass to actively transfer the glass

which can keep a fast speed, not only the large

size, small size glass can also be passed quickly.