Vertical Insulating Glass Production Line LJBZ2535
LIJIANG production line adopts the latest technology, its main
purpose is to create high-end
quality, to provide customers with the latest production technology, improve
production
efficiency, save production costs and produce maximum benefits.
Now LIJIANG mainly has two kinds of IG line with different two
different technologies. One
uses transfer wheels to transport glass, and the other is a new technology
that uses
air-floating technology to transport glass. This new technology is to prevent the glass from
being contaminated by wheels and leaving traces, so new technology is used to improve
the IG production’s high quality.
LJBZ2535 inspection and frame section is inclined vertical
structure. The transmission roller
is wear-resistant, acid and alkali polyamine grease roller,
adopting the stepless frequency
conversion speed regulation and the glass can run smoothly at the
appropriate speed.The
positioning device is divided into two parts. When making the small
size glass, the first half
aluminum frame is not positioned and only the second half of the
aluminum frame is positioned
under the aluminum frame. The digital display on the handwheel
shaft can accurately adjust
the glass side positioning and the positioning of aluminum frame to
adjust the depth of the
two components polysulfide.High quality inspection lamp can clearly
inspect the cleaning
quality of glass.
LJBZ2535 flat press loading section is inclined vertical structure.
The transmission roller is
wear-resistant, acid and alkali polyamine grease roller, adopting
the stepless frequency
conversion speed regulation and the glass can run smoothly at the
appropriate speed.This
section is used as the storage area of small glass and the storage
of super-long glass,
which improves the production efficiency of small glass. Equipped
with glass and aluminum
frame automatic detection mechanism, provide parameters for
pressing sections.
The washing machine uses 304 stainless steel materials
The whole washing and drying section adopt 304 stainless steel
materials, including the plate
and interior spare parts.
Using Europe's advanced anti-noise system to create a good working
environment for employees
The noise can be controlled below 90 decibels by using nylon gear
and sponges.
Max. glass size | 2500mm*3500mm |
Max glass size for filling gas | 2500mm*3200mm |
Min. glass size | 280mm*450mm |
Glass thickness | 3-15mm |
Insulating glass thickness | 60mm |
Glass washing speed | 2-10m/min |
Glass conveyor speed | 45m/min |
Washing brushes | 3 pairs of soft brushes with 0.1mm hair |
Water supply | Water consumption:0.5t/h conductivity:40μs/cm |
Air supply | Flow: 0.8m/min |
Air pressure | ≥0.8MPa |
Total power | 3P 380V 50HZ 40KW |
Dimension | 23500*3500*3700mm |
Weight | 6500kg |