Results for3300 5mm proximity probesfrom 2404 Products.
|
Test Probe C, IEC60529 Test Rod 2.5mm, IP3X Introduction: 1,According to: IEC61032:1997,IEC60529,IEC62368-1 2,Test Probe C is a necessary appliance for domestic and similar ...
|
|
|
|
IEC 60529 Test rod 2.5mm, IP3X Usage This wire is intended to verify the protection of persons against access to hazardous parts. It is also used to verify the protection against ...
|
|
|
|
Test Needle Diameter : Ø0.5mm or Ø1mm, Length : 20mm
|
|
|
|
Diameter 12.5mm Test Probe 2 With Force of 30N, IP Code - IP2X The product is made of nylon and stainless steel. The nylon part of the handle is black, and the probe part is a 12...
|
|
|
|
ISO 20653 Test Finger Probe Test Probe 2 - 12.5mm steel ball Tolerance 0.05mm Standard:ISO 20653, IEC61032 figure 6 probe 2,IEC60529 of IP2. Application:It is intended to verify ...
|
|
|
|
IEC60335-2-6 Test Finger Probe Surface Temperature Probe Φ5*0.5mm Tinned Copper Disc IEC60335-2-6 During the test, the temperature rise of surfaces shall not exceed the values ...
|
|
|
|
IEC 60065 Test Probe C 2.5mm Diameter 100mm Length for HAZARDOUS LIVE TEST IEC60065-2014 Clause 9.1 .5 Pre-set controls If a hole giving access to pre-set controls is marked as ...
|
|
|
|
IEC61032 Figure 3 Test Finger Probe Test Rod Probe C 2.5mm Product information: This probe conforms to standard requirements of IEC61032 test probe C and IEC60529 for IP3 and ...
|
|
|
|
IEC60529 IP2X Ingress Protection Test Equipment 12.5mm Test Probe 2 With Force of 30N Standard description: IEC 60529 13.2 Test conditions for first characteristic numerals 1 , 2, ...
|
|
|
|
Test Rod With Nylon Handle 100mm Product information: The test probe is designed and manufactured according to the IEC 60335-2-16 clause 22.102. It is used to test concealment of ...
|
|
|
|
12.5 mm Test Sphere Probe 2 With Handle , IEC61032 Figure 6 Probe 2 Test Probe Product information: This test sphere probe confirms to IEC61032 figure 6 probe 2,IEC60529 of IP2. It ...
|
|
|
|
IEC60529 IP3X Ingress Protection Test Equipment Test Rod Probe C diameter2.5mm Standard:Confirm to IEC 60529 IP3X; EN 60529 IP3X; IEC 61032-1 Figure 3; IEC 60065 and so on. ...
|
|
|
|
IEC 60529 Diameter 12.5mm Rigid Sphere With Force Of 10N-50N IP, First Characteristic Numeral 2 Standard:IEC61032 figure 6 probe 2,IEC60529 of IP2. Application:It is intended to ...
|
|
|
|
IEC60529 IP2X Ingress Protection Test Equipment Test Probe 2 With Force of 30N Standard:IEC61032 figure 6 probe 2,IEC60529 of IP2. Application:It is intended to verify the degree ...
|
|
|
|
IEC60529 IP2 Ingress Protection Test Equipment Test probe 2 - 12.5mm steel ball IEC60335-1 Clause 22.1: If the appliance is marked with the first numeral of the IP system or any of ...
|
|
|
|
IEC 60529 IP Testing Equipment Test Probe C for IP3 and Protection against contact hazards Product Introduction for IP Testing Equipment: The 2.5mm test rod conforms to IEC61032 ...
|
|
|
|
Test Rod Probe C HT-I03 Description: This rod is intended to verify the protection of persons against access to hazardous parts. It is also used to verify the protection against ...
|
|
|
|
Vertical Face Body 30000 Shots Hifu Probe SMAS Transducers Ultrasound Hifu Therapy For Face Lift Working principle of Ultrasound Therapy Ultrasound focusing with its unique high...
|
|
|
|
M12 or Solenoid value C connector Din43650 form A male 2 3 poles+ground panel mount connector,solder termination and incudes center retaining nut,incudes M3x10mm screw and M3 x 5mm ...
china
|
|
|
|
Assembly Solenoid value connector C type Din43650 form A male 2 3 poles+ground panel mount connector, solder termination and incudes center retaining nut, incudes M3x10mm screw and ...
china
|
|
|
You may also be interested in :