Results for50n rigid sphere probefrom 320 Products.
|
|
EC61032 Figure 7 Device 11 Rigid Test Finger Probe Products information: This rigid finger probe conforms to the standard requirement of IEC61032 figure 7 device 11,IEC60884...
|
|
|
|
|
IEC60335-2-24 Clause 21.102 White Lamp Test Probe for Protection Test on the Lamps Product information: This test probe conforms to IEC60335-2-24 Clause 21.102. It is used for ...
|
|
|
|
|
Test Probe D, IEC60529 Test Wire 1.0mm, IP4X Introduction: 1,According to: IEC61032:1997,IEC60529,IEC62368-1 2,Test Probe D is a necessary appliance for domestic and similar ...
|
|
|
|
|
Test Probe C, IEC60529 Test Rod 2.5mm, IP3X Introduction: 1,According to: IEC61032:1997,IEC60529,IEC62368-1 2,Test Probe C is a necessary appliance for domestic and similar ...
|
|
|
|
|
IEC 60529 Test Sphere50mm , IP1X This probe is intended to verify the protection of persons against access to hazardous parts. It is also used to verify the protection against ...
|
|
|
|
|
Terminal probe Reference Standard: IEC62368-1-Figure V.5 Technical Parameters: Each terminal is tested with the straight test probe of Figure V.5 with a force of 1 N ± 0,1 N and ...
|
|
|
|
|
Rigid Finger 1 Ø50mm, 20mm wide, 100mm long
|
|
|
|
|
IEC 60529 Test Sphere 50mm, IP1X This probe is intended to verify the protection of persons against access to hazardous parts. It is also used to verify the protection against ...
|
|
|
|
|
Terminal probe Reference Standard: IEC62368-1-Figure V.5 Technical Parameters: 1, Test Probe Length :13mm 2, Test Probe Diameter:1.0 (0, +0.005)mm 3, Dam- sphere Diameter:35mm 4, ...
|
|
|
|
|
IEC 60529 Test Equipment . List Of Equipment In Compliance With IEC 60529 No. Items Description 1 IEC 60529 Test Sphere 50mm, IP1X IEC 60529 IP1X Test Sphere 50mm This probe is ...
|
|
|
|
|
IEC60529 Ingress Protection Testing Equipment . List Of Equipment In Compliance With IEC 60529 IEC 60529 Test Equipment . List Of Equipment In Compliance With IEC 60529 No. Items ...
|
|
|
|
|
φ75 mm Test Rod As Per IEC 60335-2-30:2009 (Ed.5.0) Table 101 The dimension would be diameter 75 mm (radius of sphere: 37,5 mm), tolerance +/- 0,5 %. Length approx. 200 mm. Wall ...
|
|
|
|
|
IEC 60529 Diameter 12.5mm Rigid Sphere With Force Of 10N-50N IP, First Characteristic Numeral 2 Standard:IEC61032 figure 6 probe 2,IEC60529 of IP2. Application:It is intended to ...
|
|
|
|
|
IEC 60529 IP1X 50mm Test Sphere Probe With 10-50N Force, Ingress Protection Test Equipment Relevant descriptions in the IEC 60529: 5.1 Brief description: Protected against access ...
|
|
|
|
|
Test Sphere Probe , Test Finger Probe IEC61032 Fig.1 With Force Of 50N Product information: It conforms to the standard requirements of IEC61032 fig.1, IEC60529 IP1 and IEC60065. ...
|
|
|
|
|
Test Sphere Probe HT-I01 Description: This probe is intended to verify protection the back of hand of persons against access to hazardous parts. It is also the necessary probe used ...
|
|
|
|
|
12.5 mm Test Sphere Probe 2 With Handle , IEC61032 Figure 6 Probe 2 Test Probe Product information: This test sphere probe confirms to IEC61032 figure 6 probe 2,IEC60529 of IP2. It ...
|
|
|
|
|
IEC 60529 IP1X Ingress Protection Test Equipment Test Sphere Probe Sphere of 50mm Description: IEC 60529 12.3 Acceptance conditions The protection is satisfactory if adequate ...
|
|
|
|
|
IEC61032 Figure 7 Device 11 Rigid Test Finger Probe Products information: This rigid finger probe conforms to the standard requirement of IEC61032 figure 7 device 11,IEC60884...
|
|
|
|
|
50.8mm Steel Ball With Ring For Impact Test 535g UL507 Test Sphere Probe Standard:IEC61032 figure 5 test probe 1,IEC60335,IEC60950, IEC60598,UL507. Application:It is intended to ...
|
|
|
You may also be interested in :
