Home Companies Ningbo Uv Light & Electricity Co., Ltd.

Large Power UV Lamp Electronic Ballast 320w resister Indicator

Active Member

Contact Us

[China]

Address: Xiexi industrial Zone Daxie,Ningbo city,Zhejiang, China

Contact name:Benny

Ningbo Uv Light & Electricity Co., Ltd.

Large Power UV Lamp Electronic Ballast 320w resister Indicator

Country/Region	china
City & Province	ningbo zhejiang
Categories	Ballasts

Product Details

320w Electric Ballasts For Two Pcs 90w-155w UVC Lamps Electronic Ballast

The role of ballasts
There are mainly two aspects:

1. Generate high pressure, the ignition lamp tube breaks the rare gas in the lamp,

2. After the lamp starts to glow, it plays the role of ballast (current limiting), so that the lamp can work normally and stably.

Gas discharge lamps have high starting voltage and low discharge sustaining voltage. When the lamp is started through high voltage, the voltage drops and the current increases. If there is no restriction, the lamp current will continue to increase until the lamp burns out, so it is necessary to discharge A ballast that matches the type and specification of the lamp is connected in series in the lighting circuit of the lamp to provide a high starting voltage to start the lamp, and limit the lamp current to stabilize it within the specified range

For some lamps, the ballast also has the effect of heating (preheating) the electrodes at both ends of the lamp.

PH8 series 55W-155W

■Features

• Preheat start.

• With indicator function. Green led indicates UV lamp

operating normally. Red led indicates UV lamp broken down,

with functions of on-off value (dry contacts).

• Double lamp parallel structure design, two groups of UV

lamp state feedback function

■Load Lamp

• PH8-1200-2/105U:

2*GPHVA843T5,GPHVA357T5

Wiring diagram: A

• PH8-800-2/155:

2*GPH1554T5HO,GHO64T5,TUV64T5HO,TUVPL-L95WHO,TL100W

Wiring diagram: A

• PH8-800-2/87U:

2*GPH893T5HO,GPH846T5HO,GHO36T5,TUV95WHOPL-L,TUV75WHO,

TUV60WHO,TUV55WHO,TUV36T5HO

Wiring diagram: A

• PH8-425-2/75U:

2*GPH1554T5L,GPH1630T5L,GPH843T5L

Wiring diagram: A

■Packaging information

• Size of Ballast: 250*65*40mm

Mounting Distance:240mm

• Size of Package: 460*270*190mm

Quantity:18PCS

Note for ordering

・ Input power cord should be changed into different national

standardized power cord. Such as GB, BIS, CE, SAA, etc.

Different power cord has different ordering number (must

check it carefully before ordering). Output line can also be

changed into 4*0.5 mm2,4*18#,5*18#, etc. Output line can

add waterproof connector, dust cover, hole plugs, detailed

information see the accessories list.

The power supply must be cut off before installing and

replacing the ballast.The connecting line between ballast

and lamp tube shall not exceed 5m

Product Description

Product name	Electronic ballast for 2pcs 90-155w uv lamps
Input Wattage	320w
Voltage	220 v -240v
Lamp quantity	2 pcs
Color	White
Application	Germicidal ultraviolet Lamps
Size	256.54 cm
Brand	UV or OEM
Warranty	2 years

Product Presentation

Ballasts can be complicated. Nobody replaces ballasts regularly.
Inevitably, ballasts are needed when you go to change out the UV
bulb at your machine's recommended intervals when you realize that
the new bulb is not lighting up or is flickering. Instead of an
easy UV bulb switch, your maintenance just became a potentially
complicated electronic ballast search and installation.
Finding the right ballast is the first hurdle but not the only one.
Even after you take receipt of the ballast, you have to figure
out how to wire them. Depending on the bulb type and the number of
bulbs in your system, the wiring can change completely. It is not
incredibly complicated, but more troublesome than it is worth for
the majority of UV air or water purification system operators.
we want to take the guesswork out of ballast replacement. With this
ballast, you are guaranteed to receive the right
ballast with the right wiring diagram. Any questions, and we'll be
here every step along the way to help you out.
 

Product Name	Electronic ballast
Material	Iron
Inpurt Power	320w
Voltage	220
Type of Lamp-house	all
Model	PH8-800-2-155
Style	Electric

We design and manufacture UVC ballasts for a wide range of
germicidal ultraviolet lamps used in a variety of water, air, and
surface purification devices. Our ballasts are essential to
increasing the safety and working lifetime of UVC lamps. No matter
the size, power, or lamp configuration required for your
application, Our team of engineers will design and manufacture a
ballast with the desired certifications to fit perfectly into your
system. Our collaborative approach helps us serve as an extension
of your engineering and design team.

Company Introduction
FAQ
FAQ Q1: What is your main product? A: We focus on UV light lamp, UV
sterilizer and related product. Q2: Are you a Manufacturer and
Trading Company? A:We are a manufacturer of UV sterilizer and UV
germicidal lamp with over 20 years' experiences in industy. We are
able to provide you a perfect solution for your inquiry. Q3: What
is the minimum order quantity? A: Our MOQ is 100pcs. Q4:Can i get
sample for testing? A:Yes. Testing samples are charged. You only
need to pay for the shipping. Q5: Can i print logo on led light
product? A: Certainly. Please provide your logo design for
checking. Q6: What kind of shipping do you use to ship the
products? A: For small quantity order we ship by courier, this is
the most reliable service in order to reach you promptly and
safely. For big quantity order,we ship by sea or by air. Q7: What
is your payment? A: Cash, T/T, L/C, Credit Card, Paypal etc.