Home Companies Ningbo Uv Light & Electricity Co., Ltd.

206W UV Lamp Electronic Ballast White For Two Pcs 42w 75w 90w Light

Active Member

Contact Us

[China]

Address: Xiexi industrial Zone Daxie,Ningbo city,Zhejiang, China

Contact name:Benny

Ningbo Uv Light & Electricity Co., Ltd.

206W UV Lamp Electronic Ballast White For Two Pcs 42w 75w 90w Light

Country/Region	china
City & Province	ningbo zhejiang
Categories	Ballasts

Product Details

Long Life Span Electric Ballasts For Two Pcs 42w-75w UVC Lamps

If the service life of the UV sterilizer is not reached, there are many reasons. 1. Lamp quality: If the quality of the lamp is not high enough, there are many impurities in it, which will cause difficulty in starting or insufficient strength. Attenuation can be rapid. 2. Electronic ballast: The start-up of the lamp depends on the electronic ballast, but the current of the electronic ballast that is turned off is not stable enough or the model that does not match the lamp is selected, the lamp may burn out prematurely and appear blackhead phenomenon. 3. Use and maintenance: Excessive switching is also an important cause of early termination of life. These are the common reasons that lead to less life expectancy, and the others need to be analyzed on a case-by-case basis.

PL8 series 40W-200W

■Features

• Applicable to the field less than three switch on-off cycles,

especially applicable to instant start the lamp.

• with function of on-off value (dry contacts)

• 5VDC output function, 5VDC output: UV lamp operating

normally； 0VDC output: UV lamp failed or powered off. It

may drive LED directly.

■Load Lamp

• PL8-425-2/75U:

2*GPH1630T5,GPH1554T5,GPH1148T5,GPH843T5,

TUV64T5,G64T5,G36T5

Wiring diagram: A

4*GPH843T5,GPH793T5,GPH550T5,GPH436T5,G36T5,

TUV36T5,TUVPL-L36W, TUV36W

Wiring diagram: B

• PL8-800-2/155:

2*GPH893T5HO,GPH846T5HO,GHO36T5,

TUV95WHOPL-L,TUV75WHO,TUV60WHO,TUV55WHO,

TUV36T5HO

2*GPH1554T5HO,GHO64T5,TUV64T5HO,TUVPL-L95WHO,

TL100W Wiring diagram: A

• PL8-1200-2/105U:

2*GPHVA843T5,GPHVA357T5

Wiring diagram: A

• PL8-800-155 & PL8-800-155 (480V ):

GPH1554T5HO,GHO64T5,TUV64T5HO,TUVPL-L95WHO,

TL100W

Wiring diagram: C

• PL8-1200-190:

GPHA843T5L,GPHA1000T5,GPHA1554T5

Wiring diagram: C

• PL8-2100-200:

GPHHA843T6,GPHHA1000T

Wiring diagram: C

■Packaging information

• Size of Ballast: 250*65*40mm

Mounting Distance:240mm

• Size of Package: 460*270*190mm

Quantity:18PCS

Note for ordering

・ Input power cord should be changed into different national

standardized power cord. Such as GB, BIS, CE, SAA, etc.

Different power cord has different ordering number (must

check it carefully before ordering). Output line can also be

changed into 4*0.5 mm2,4*18#,5*18#, etc. Output line can

add waterproof connector, dust cover, hole plugs, detailed

information see the accessories list.

The power supply must be cut off before installing and

replacing the ballast.The connecting line between ballast

and lamp tube shall not exceed 5m

Product Description

Product name	Electronic ballast for 90-155w uv lamps
Input Wattage	206w
Voltage	240 v 110v
Lamp quantity	2 pcs 42w-75w
Color	White
Application	Germicidal ultraviolet Lamps
Size	256.54 cm
Brand	UV or OEM
Warranty	2 years

Product Presentation

Ballasts can be complicated. Nobody replaces ballasts regularly.
Inevitably, ballasts are needed when you go to change out the UV
bulb at your machine's recommended intervals when you realize that
the new bulb is not lighting up or is flickering. Instead of an
easy UV bulb switch, your maintenance just became a potentially
complicated electronic ballast search and installation.
Finding the right ballast is the first hurdle but not the only one.
Even after you take receipt of the ballast, you have to figure
out how to wire them. Depending on the bulb type and the number of
bulbs in your system, the wiring can change completely. It is not
incredibly complicated, but more troublesome than it is worth for
the majority of UV air or water purification system operators.
we want to take the guesswork out of ballast replacement. With this
ballast, you are guaranteed to receive the right
ballast with the right wiring diagram. Any questions, and we'll be
here every step along the way to help you out.
 

Product Name	Electronic ballast
Material	Iron
Inpurt Power	206w
Voltage	240v-110v
Type of Lamp-house	all
Model	PH8-1200-190
Style	Electric

We design and manufacture UVC ballasts for a wide range of
germicidal ultraviolet lamps used in a variety of water, air, and
surface purification devices. Our ballasts are essential to
increasing the safety and working lifetime of UVC lamps. No matter
the size, power, or lamp configuration required for your
application, Our team of engineers will design and manufacture a
ballast with the desired certifications to fit perfectly into your
system. Our collaborative approach helps us serve as an extension
of your engineering and design team.

Company Introduction
FAQ
FAQ Q1: What is your main product?
A: We focus on UV light lamp, UV sterilizer and related product.
Q2: Are you a Manufacturer and Trading Company?
A:We are a manufacturer of UV sterilizer and UV germicidal lamp
with over 20 years' experiences in industy. We are able to provide
you a perfect solution for your inquiry.
Q3: What is the minimum order quantity?
A: Our MOQ is 100pcs. Q4:Can i get sample for testing?
A:Yes. Testing samples are charged. You only need to pay for the
shipping.
Q5: Can i print logo on led light product?
A: Certainly. Please provide your logo design for checking.
Q6: What kind of shipping do you use to ship the products?
A: For small quantity order we ship by courier, this is the most
reliable service in order to reach you promptly and safely. For big
quantity order,we ship by sea or by air.
Q7: What is your payment?
A: Cash, T/T, L/C, Credit Card, Paypal etc.