Home Companies Ningbo Uv Light & Electricity Co., Ltd.

35w UV Lamp Electronic Ballast Steady Output UV Light Ballast

Ningbo Uv Light & Electricity Co., Ltd.
Active Member

Contact Us

[China] country

Address: Xiexi industrial Zone Daxie,Ningbo city,Zhejiang, China

Contact name:Benny

Inquir Now

Ningbo Uv Light & Electricity Co., Ltd.

35w UV Lamp Electronic Ballast Steady Output UV Light Ballast

Country/Region china
City & Province ningbo zhejiang
Categories Ballasts
InquireNow

Product Details

35w-95w UVC Lamps Electronic Ballast UV Light Ballasts 12 Months Warranty

 

 

Select the right electric ballast 

Be sure to select the appropriate model.

Since the core function of the ballast is to protect the UV lamp and prolong the service life. If the selected ballast does not match the parameters of the lamp, it is like a twisted melon - both parties are victims.

Therefore, we recommend that you seek the help of professional suppliers to assist in the selection to achieve the best efficiency. Blind choice will bring loss of time and money to the enterprise.

Product Description

 

Product name
Preheat start Electronic ballast for 35-95w uv lamps
Input Wattage
108w
Voltage
220 v -240v
Lamp quantity
1 pcs
Color
White
Application
Germicidal ultraviolet Lamps
Size
18.5*5.6*3.8 cm
Brand
UV or OEM
Warranty
2 years
 

Precautions
1. Instantaneous start V.S. Delay start

Some friends think that the selection of electronic ballasts for ultraviolet lamps is better than that of instant start than delayed start.

In fact, when matching low-power lamps, the impact is not very obvious, but when matching high-power UV germicidal lamps (such as 120W, 150W and 320W, etc.), the instantaneous start has a great impact on the service life of the UV lamp. This is because when the ultraviolet germicidal lamp starts, the required starting current is very large, which is easy to break down the lamp tube, and the delayed start reduces the instantaneous pressure through energy storage, which has a better protection effect on the lamp tube.

• PH7-800-95U: 1*GPH893T5HO,GPH846T5HO,GHO36T5,TUV95WHOPL-L, TUV75WHO, TUV60WHO,TUV55WHO,TUV36T5HO
 
Wiring diagram: A 2*GPH436T5HOTUVPL-L35WHO
Wiring diagram: B
■Features
• .Preheat start
• With indicator function. Green led indicates UV lamp operating
normally. Red led indicates UV lamp broken down, with functions of
on-off value (dry contacts)
 
Note for ordering
・ Input power cord should be changed into different national
standardized power cord. Such as GB, BIS, CE, SAA, etc.
Different power cord has different ordering number (must
check it carefully before ordering). Output line can also be
changed into 4*0.5 mm2,4*18#,5*18#, etc. Output line can
add waterproof connector, dust cover, hole plugs, detailed
information see the accessories list.
The power supply must be cut off before installing and
replacing the ballast.The connecting line between ballast
and lamp tube shall not exceed 5m
 

 

 

Product Presentation

Ballasts can be complicated. Nobody replaces ballasts regularly. Inevitably, ballasts are needed when you go to change out the UV bulb at your machine's recommended intervals when you realize that the new bulb is not lighting up or is flickering. Instead of an easy UV bulb switch, your maintenance just became a potentially complicated electronic ballast search and installation.
Finding the right ballast is the first hurdle but not the only one. Even after you take receipt of the ballast, you have to figure
out how to wire them. Depending on the bulb type and the number of bulbs in your system, the wiring can change completely. It is not incredibly complicated, but more troublesome than it is worth for the majority of UV air or water purification system operators.
we want to take the guesswork out of ballast replacement. With this ballast, you are guaranteed to receive the right
ballast with the right wiring diagram. Any questions, and we'll be here every step along the way to help you out.

 

 
 
Product Name
Electronic ballast
 
Material
Iron
 
Inpurt Power
108w
 
Voltage
220
 
Type of Lamp-house
all
 
Model
PH7-800-95U
 
Style
Electric
We design and manufacture UVC ballasts for a wide range of germicidal ultraviolet lamps used in a variety of water, air, and surface purification devices. Our ballasts are essential to increasing the safety and working lifetime of UVC lamps. No matter the size, power, or lamp configuration required for your application, Our team of engineers will design and manufacture a ballast with the desired certifications to fit perfectly into your system. Our collaborative approach helps us serve as an extension of your engineering and design team.
Company Introduction

Hot Products

uv light ballasts for 35w-95w uvc lamps disinfection light electronic ballast Electronic ballast is ...
Electric ballasts 320w With Indicator Function For Two Pcs 90w-155w UVC Lamps The basic composition ...
206w electric ballasts for two pcs 42w-75w uvc lamps ballast PL8 series 40W-200W ■Features • ...
Long Life Span Electric Ballasts For Two Pcs 42w-75w UVC Lamps If the service life of the UV ...
35w-95w UVC Lamps Electronic Ballast UV Light Ballasts 12 Months Warranty Select the right electric ...
35-95w electric ballasts for germicidal uv tubes 30w 40w 50w 60w OZONE OR OZONE FREE • PH7-800-95U: ...