Ningbo Nijia Electronics Technology Co.,Ltd |
|
ASCO Aluminum integral pilot valve 25 mm AC230V AC 1 " SCG353A044 pulse jet valve
Specification:
Ordering Code | Port Size | Orifice | Flow Value | Coil type | |
G Threaded | mm | m3/h | l/min | ||
SCG353A043 | 3/4" | 20 | 14 | 233 | 400325 |
SCG353A043C | 3/4" | 20 | 14 | 233 | 0200 |
SCG353A044 | 1" | 25 | 17 | 383 | 400325 |
SCG353A044C | 1" | 25 | 17 | 383 | 0200 |
OPTIONS:
1 | Valves can also be supplied with FPM (fluorelastomer) diaphragms and seal materials. Use the appropriate optional suffix 'V' for identification |
2 | Sequential controller for pilot solenoid valves |
3 | Pilot boxes containing 2 to 12 pilot solenoid valves |
4 | Pilot solenoid valves can be equipped with explosionproof solenoids for hazardous locations according to “ATEX” and national standards |
INSTAllATION:
1 | Mount valves to inlet pipes and blow tube to valves, ensuring no excess thread sealant can enter the valve itself. |
2 | Apply moderate pressure to system and check for installation leaks. Fully pressurise system. |
3 | Test fire and listen for proper actuation and crisp pulse noise. |
4 | The valves can be mounted in any position without affecting operation,Threaded pipe connection is: G = G (ISO 228/1) or compression fittings |
5 | Other pipe threads are available on request, Installation/maintenance instructions are included with each valve, Spare parts kit and replacement coils are available |
6 | When connecting piping or tubing to the G1/8 connection in the valve bonnet, the remote ASCO pilot valve should be mounted as close as possible to the main pulse valve. Connection tubing lengths of 3 meter or less have little effect on the pulse response. Installations with over 3 meter of tubing must be tested under actual operating conditions. Tubing with Ø 6 mm O.D. is recommended for all installations |
7 | For compression fitting types tightness is achieved by the compressed gasket on the blow tube |
8 | Ensure tank and pipes are free from dirt, rust or other particulate. Ensure supply air is clean and dry. |
DIMENSIONS (mm), WEIGHT (kg):
Ordering Code | A | B | C | D | E | F | G | H | J | K | Weight |
SCG353A043 | 75 | 45 | 27 | 51 | 89 | 75 | 39 | 92 | 113 | 130 | 0.72 |
SCG353A043C | 65 | 38 | 20 | 51 | 89 | 75 | 39 | 92 | 113 | 130 | 0.65 |
SCG353A044 | 75 | 45 | 27 | 51 | 89 | 75 | 39 | 92 | 113 | 130 | 0.7 |
SCG353A044C | 65 | 38 | 20 | 51 | 89 | 75 | 39 | 92 | 113 | 130 | 0.62 |
FEATURES:
1.The 3" dust collector pulse diaphragm pulse valves are especially designed for dust collector service
applications, combining high flow, long life and extremely
fast opening and closing to provide reliable and economical
operation
2.The high flow, angle type bodies in combination with the special
main diaphragm
assemblies give the unique operating features required
for dust collector service applications3.The design with integral
compression fittings will facilitate installation because there is
no need for
threaded piping
3.The high quality diaphragms are reinforced and wear resistant to
guarantee a long operating life,
even under harsh conditions