|
[China]
Trade Verify
Address: 608, Building B, Yinyi Duhui Guoji, No.8, Lane 559, Youngor Avenue, Haishu District, Ningbo, China
Contact name:Brandon Bao
Ningbo Brando Hardware Co., Ltd |
|
Verified Suppliers
|
|
|
APPLICATIONS:
These mount valves are suitable for use in dust management systems in all types of industries and processes, including:
cement production
mining applications
silo and conveyor systems, bulk goods handling
general industrial dust collection
improving indoor workplace air quality
preventing harmful emissions
power industry: protecting boilers and gas turbines from dust
particles
Their tough and reliable design has brought them to
high-performance systems around the world to control the
dispersion of noxious substances, improve indoor air quality in workplaces, or prevent harmful dust emissions.
The full immersion technology makes them suitable for demanding applications.
Main Dimension Diagram of 1 1/2 Inch DN45 CA45T Goyen Type
Dust Collector Pulse Valve:
Technical parameters of Goyen Type T Series Reverse Pulse Jet Valves:
| Model numbers | CA15T | CA20T | CA25T | CA35T | CA45T | CA50T | CA62T | CA76T |
| Nonimal diameter | φ15 | φ20 | φ25 | φ35 | φ45 | φ50 | φ62 | φ76 |
| Port size | G1/2'' | G3/4'' | G1'' | G1-1/4'' | G1-1/2'' | G2'' | G2-1/2'' | G3'' |
| Weighgts (kg) | 0.6 | 0.6 | 0.72 | 1.1 | 1.5 | 2.9 | 3.4 | 4.8 |
| Operation | Internal pilot | |||||||
| Working pressure | 0.3-0.8 mpa | |||||||
| Environment temperature | -5℃-55℃ | |||||||
| Relative Humidity | ≤85% | |||||||
| Operating medium | Compressed air | |||||||
| Protection class | IP 65 | |||||||
| Service life | Over 1000000 times | |||||||
| Voltages | DC24V, AC110V, AC220V, AC230V | |||||||
Details of 1 1/2 CA45T Goyen Type Diaphragm Valve In Reverse Pulse Jet System:
Tips: All accessories can be sold separately as repair parts
(Diaphragm, Solenoid Coil, Armature Assembly)
MAINTENANCE
Before conducting any maintenance activity on the system ensure
that components are fully isolated from pressure and power
supplies. Pressure and power should not be reapplied until the
valve has been fully assembled. Diaphragm and pilot inspection
should be conducted annually.
INSTALLATION
1. Prepare supply and blowtube pipes to suit valve specification.
Avoid installing valves underneath the tank.
2. Ensure tank and pipes are free from dirt, rust or other
particulate.
3. Ensure supply air is clean and dry.
4. Mount valves to inlet pipes and blowtube to valves, ensuring no
excess thread sealant can enter the valve itself.
5. Make electrical connections to solenoid or connect RCA pilot
port to pilot valve (RCA valves only).
6. Apply moderate pressure to system and check for installation
leaks.
7. Fully pressurise system.
8. Test fire and listen for proper actuation and crisp pulse noise.
Youtube video of 1 1/2 Inch CA45T Goyen Type Dust Collector
Pulse Solenoid Valve:
Focus on your demands, Offer you best solution:
√ Contact us if some points you have doubt
√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for
√ Contact us if you are doing designing
Welcome to your any question and inquiry!
