Ningbo Brando Hardware Co., Ltd |
Verified Suppliers
|
|
Product about us:
good quality materials be used in ours solenoid
valve,Strictly control each production to ensure that cuscustomer
get satisfactory product.Provide customized services according to
different requirements of customers,
like different voltage,sizes,and others.From the beginning of
production to the customer getting the product.We always follow the
products.
Used For Following:
concrete processing
grain agriculture and feed
metal working( abrasive blasting)
food processing
dust collect system
Main dimension of 1/2 Inch DN15 CA15T Goyen Type Dust Collector
Pulse Valve:
Technical parameters of Goyen Type T Series Reverse Pulse Jet
Valves:
Model numbers | CA15T | CA20T | CA25T | CA35T | CA40T | CA50T | CA62T | CA76T |
Nonimal diameter | φ15 | φ20 | φ25 | φ35 | φ40 | φ50 | φ62 | φ76 |
Port size | G1/2'' | G3/4'' | G1'' | G1-1/4'' | G1-1/2'' | G2'' | G2-1/2'' | G3'' |
Weighgts (kg) | 0.6 | 0.6 | 0.72 | 1.1 | 1.5 | 2.9 | 3.4 | 4.8 |
Operation | Internal pilot | |||||||
Working pressure | 0.3-0.8 mpa | |||||||
Environment temperature | -5℃-55℃ | |||||||
Relative Humidity | ≤85% | |||||||
Operating medium | Compressed air | |||||||
Protection class | IP 65 | |||||||
Service life | Over 1000000 times | |||||||
Voltages | DC24V, AC110V, AC220V, AC230V |
Details of 1/2 CA15T Goyen Type Diaphragm Valve In Reverse Pulse Jet System:
Tips: All accessories can be sold separately as repair parts
(Diaphragm, Solenoid Coil, Armature Assembly)
Youtube video of 1/2 Inch CA15T Goyen Type Dust Collector Pulse
Solenoid Valve:
MAINTENANCE
Before conducting any maintenance activity on the system ensure
that components are fully isolated from pressure and power
supplies. Pressure and power should not be reapplied until the
valve has been fully assembled. Diaphragm and pilot inspection
should be conducted annually.
INSTALLATION
1. Prepare supply and blowtube pipes to suit valve specification.
Avoid installing valves underneath the tank.
2. Ensure tank and pipes are free from dirt, rust or other
particulate.
3. Ensure supply air is clean and dry.
4. Mount valves to inlet pipes and blowtube to valves, ensuring no
excess thread sealant can enter the valve itself.
5. Make electrical connections to solenoid or connect RCA pilot
port to pilot valve (RCA valves only).
6. Apply moderate pressure to system and check for installation
leaks.
7. Fully pressurise system.
8. Test fire and listen for proper actuation and crisp pulse noise.
Focus on your demands, Offer you best solution:
√ Contact us if some points you have doubt
√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for
√ Contact us if you are doing designing
Welcome to your any question and inquiry!