HengAnshun Jump Starter Portable Charger car smart battery trickle charger For Any Vehicle Batteries 12V 24V 260W

HengAnshun Jump Starter Portable Charger car smart battery trickle charger For Any Vehicle Batteries 12V 24V 260W

Product Description:

Our factory takes pride in manufacturing portable car battery chargers that offer a range of features and benefits. These chargers are versatile, catering to a wide variety of battery types, including lead-acid batteries, maintenance-free batteries, start batteries, start-stop batteries, 12V and 24V batteries, and 12.6V lithium batteries.

An intelligent microcomputer chip is integrated into the charger, overseeing the entire charging process. This dedicated chip ensures precise control and management of the charging parameters. Additionally, the charger employs advanced pulse width modulation (PWM) technology, enabling efficient and accurate charging. Its compact size adds to its convenience and user-friendliness. Furthermore, the charger boasts high-efficiency conversion, resulting in a stable output current.

One of the standout features of our charger is its large design capacity, enabling it to operate at full load for extended periods. This capability makes it suitable for demanding charging tasks. Moreover, the charger aligns with eco-friendly principles, representing a new generation of environmentally conscious charging solutions.

Safety is a paramount consideration in our charger's design. To safeguard against potential hazards, the charger is equipped with multiple protective features. These include short-circuit protection, reverse polarity protection, overtemperature protection, and low-voltage protection. By incorporating these safeguards, the charger ensures the longevity of the battery by preventing potential damage.

The charger supports various charging states, including constant current, constant voltage, floating, trickle, and others. This versatility allows for efficient and optimized charging, leading to improved battery life. Additionally, the charger helps reduce the rate of battery water loss and addresses issues such as battery heating and overcharging. By minimizing these problems, the charger promotes the overall health and performance of the battery.

In summary, our portable car battery chargers offer a range of features and benefits that make them reliable and efficient charging solutions. From their compatibility with various battery types to their intelligent microcomputer chip and advanced PWM technology, these chargers ensure precise and optimal chargingThank you for pointing out the similarity in the responses. Here's a revised version that further differentiates the description of the portable car battery charger:

Our factory takes great pride in manufacturing top-of-the-line portable car battery chargers that are specifically designed to provide exceptional performance and convenience. Our chargers are meticulously engineered to accommodate a broad range of battery types, including lead-acid batteries, maintenance-free batteries, start batteries, start-stop batteries, 12V and 24V batteries, 12.6V lithium batteries, and more.

The heart of our charger lies in its sophisticated intelligent microcomputer chip. This cutting-edge chip ensures precise and optimal control over the entire charging process, resulting in efficient and reliable charging performance. Combined with advanced pulse width modulation (PWM) technology, our chargers deliver highly accurate and efficient charging, ensuring that your batteries are charged to their fullest potential.

In addition to their advanced technology, our chargers are designed with user convenience in mind. They feature a compact and portable design, making them easy to carry and store. Whether you're at home, on the road, or in the great outdoors, our chargers are your reliable companion for battery charging needs.

Efficiency is a key factor that sets our chargers apart. With high-efficiency conversion, our chargers provide a stable output current, minimizing energy waste and maximizing the charging efficiency. This translates to faster charging times and less downtime for your batteries.

Moreover, our chargers are equipped with a large design capacity, allowing them to handle heavy loads without compromising performance. This means that even during demanding charging tasks, our chargers maintain their efficiency and reliability, ensuring that your batteries are charged quickly and effectively.

Safety is always a top priority for us. Our chargers are equipped with a comprehensive range of protective features, including short-circuit protection, reverse polarity protection, overtemperature protection, and low-voltage protection. These safety measures provide peace of mind, protecting both your batteries and the charger itself from potential damage.

Furthermore, our chargers offer a wide range of charging modes and options to suit different battery requirements. Whether you need constant current charging, constant voltage charging, floating charging, or trickle charging, our chargers have you covered. This versatility ensures that your batteries are charged optimally, leading to improved battery life and performance.

Operation Mode

No-load standby: When the charger separates from the battery due to poor contact during charging or replaces another battery, the display will clearly show empty On-board standby. Standby is equivalent to about 2W energy consumption of small luminous lamps.

Constant current mode: When the battery voltage is lower than the charger's set voltage, it is a constant current charging mode, and the charger will provide a constant charging current to the battery.It has the effect of protecting the battery and charger.

Constant pressure mode: Pulse width modulation (PWM) technology is used. Precisely control the charger's charge current and output voltage to ensure that the battery is safely fully charged. It is best to avoid overcharging the battery.

Floating charge mode: When the battery is about to be fully charged, the charger does not stop charging,but still provides a constant float charge voltage and a small float charge stream to supply the battery.

Trickle mode: When the battery voltage is close to the set voltage value, the charge current gradually decreases to the set current. The charger will automatically switch from charging mode to trickle mode. Indicates that charging is complete. You can also continue to float.

Protection:

1.Overtemperature protection: The charger shuts down protectively when the charger temperature exceeds 105°C. At this time, there is no current output, and it can be resumed when the temperature drops to about 80 ° C or after about ten minutes of power off.

2.Short-circuit protection:When the charger output is unexpectedly shorted, the charger will automatically turn off the output, eliminate the short circuit, and automatically resume charging after correct connection.

3.Reverse polarity protection: When the charger outputs positive and negative poles opposite the charge, the charger will automatically turn off the output, and the charging will automatically resume charging after correctly connecting the polarity.

4.Low-voltage protection: When the battery single cell voltage is lower than 1.5V, the charger protection cannot be started, so as to avoid damage to the device due to the mismatch between the battery and the charger voltage.

Attention:

1.Proper cooling fan operation: It is crucial to ensure that the cooling fan of the charger is functioning properly while charging the battery. The cooling fan helps dissipate heat generated during the charging process, preventing overheating and ensuring the charger's optimal performance.

2.Prohibited modes during lithium battery charging: To prevent damage to the lithium battery with different voltage values, it is important to avoid using other charging modes intended for different battery types. For a 12V lithium battery, the full charge voltage should be around 12.6V±0.2V, while a 24V lithium battery requires a full charge voltage of approximately 25.2V±0.2V.

3.Voltage identification display range: The charger has a voltage identification display range to indicate the voltage of the battery being charged. In the 12V mode, the charger can identify and display voltages within the range of 10V-15V, while in the 24V mode, it can identify and display voltages within the range of 20V-29V.

4.Manual monitoring for certain batteries: It is recommended to manually monitor the first charge of a leakage battery and batteries below 20AH. During this initial charging process, it is important to visually inspect the battery's appearance and the battery liquid to avoid overcharging and deformation of the drum. This manual monitoring helps ensure the battery's safety and integrity during charging.

Function:

Lithium battery: This charger is specifically designed for charging three strings of 12.6V lithium batteries. The charger is set to cater to the charging needs of these specific lithium batteries. The full charge voltage for a 12V lithium battery is 12.6V. It is important to note that charging lithium batteries or faulty batteries with different specifications is prohibited to ensure safe and proper charging.

Ordinary battery: The charger has a charging mode for ordinary batteries, which supports both 12V and 24V batteries. When the charger is set to the ordinary battery intelligent charging mode, it can charge 12V and 24V batteries. For a 12V battery, the full voltage during charging is set at 14.2V±0.2V. Similarly, for a 24V battery, the full voltage value for charging is 29.2V±0.4V.

Start-stop battery: The charger also has a specific charging mode for start-stop batteries, which also supports both 12V and 24V batteries. When the charger is set to the start-stop battery intelligent charging mode, it can charge 12V and 24V batteries. The full charge voltage for a 12V start-stop battery is set at 14.6V±0.2V. Similarly, for a 24V start-stop battery, the full voltage value for charging is 29.2V±0.4V.

Troubleshooting:

Technical Parameters:

1.Rated input voltage range: 110V-250V; This indicates that the power supply or charger can accept input voltages within the range of 110 volts to 250 volts.

2.Output voltage: 12V/24V;The power supply or charger can provide two different output voltage options, either 12 volts or 24 volts.

3.Rated operating frequency: 50/60Hz;This means that the power supply or charger can operate on both 50 Hz and 60 Hz frequency power sources.

4.Full load conversion efficiency: 93%;This indicates that the power supply or charger has an efficiency of 93% when operating at full load. In other words, it can convert input power to the output power with a minimum energy loss.

5.Operating temperature range: -30°C to 45°C;The power supply or charger is designed to operate within the temperature range of -30 degrees Celsius to 45 degrees Celsius. It can function properly within this temperature range without any significant issues.

6.Charging mode: The charging mode is described as "No load - constant current-constant pressure - float charge - trickle." This suggests that the power supply or charger follows a specific charging algorithm or sequence. It starts with a no-load condition, then applies a constant current to charge the battery until it reaches a certain voltage (constant pressure). Once the battery voltage reaches the desired level, it switches to a float charge mode to maintain the battery at a specific voltage. Finally, it enters the trickle charge mode, which provides a low current to compensate for any self-discharge of the battery.

battery and all connections. (Please contact customer service in time)

FAQ:

Q: Why is the current getting smaller and smaller?The current is not 30A.

A: Charging principle: pulse. Pulse can protect the battery and prolong its service life.

The difference is that the pulse charger can keep the charging process dynamic, balance the charging and discharging process, reduce the water loss during the charging process, and prevent the problem of sulfation, so that the battery capacity can be restored and the battery life will be increased.

Pulse is not a constant voltage and current. It will match the charging voltage and current according to the battery status. The charging current will become smaller and smaller as the battery power increases.

The pulse is designed to better protect the battery from being injured due to overcharge.

Not all batteries can reach the peak current. If the battery capacity is large and the power loss is severe, the current will be higher.

Q: Are 12V/24V and lithium battery automatically compatible?

A: 1. Manual selection is required; 2. 12V/24V self-defined identification, lead-acid battery, water battery, dry battery. 3. Lithium battery: 12V, lithium iron phosphate battery cannot be charged (it depends on whether the charger supports 12.6V lithium battery)

Q: How to operate?

A: The first step is to check whether the battery is good or bad. Operation method: the charger is not plugged in, just clip the charger clip to the positive and negative poles of the battery. The display will show the current internal pressure of the battery. There are two conditions not shown: 1. Charger problem 2. Battery voltage is lower than 8V.

The second step is that the charger has normal input and output. Only plug in, and the display will be on. By default, 12V and POWER are on. When the red and black clips meet, the spark charger is completely normal.

Q:What is the differences between chargers?

A:1. Make sure what type of battery needs to be charged.
2.Different power sizes affect the charging time of the charger.

Q: What is the function of the charger?

A:1. Check the internal pressure of the battery; 2. Repair; 3. Charging.

Q: Why can't the battery reach the current you said?

A: Generally, the battery capacity is not large enough to give all the output current to the battery. I'm afraid that the battery can't bear it, which will make the battery damage.

P.S. Most of the batteries that need to be recharged with chargers have some problems

Q: Why cant the two 12V series connection recognize 24V for charging?

A: If the battery is a combination of two 12V batteries and can not directly identify the 24V charging, the internal pressure of the two batteries can be detected separately, and the large difference is unrecognizable. Two 12V batteries need to be charged separately

Q: Why does the display screen not light after plugging in?

A: 1.Plug in only, the display screen is not on, and the indicator light is not on. The safety tube is burnt and the product is defective

1. The 12V and power indicators are on. It may be that the display cable is loose. Maybe the display screen is broken