Silver Color Jump Starter Portable Charger With Intelligent Digital Display Lead-Acid Fast Charging Car Battery Charger

Silver Color Jump Starter Portable Charger With Intelligent Digital Display Lead-Acid Fast Charging Car Battery Charger

Product Description:

Our factory is based on lead-acid battery, maintenance-free battery, starting battery lithium battery and other 12V / 24V / 60V / 72V battery and professional design and production.

It uses a dedicated intelligent microcomputer chip to control the whole process using advanced pulse width modulation technology. It has the advantages of small size, safe and convenient, high conversion efficiency, stable output current, large design capacity, and long time full load operation. It is a new generation of environmental protection charger.

The charger has short circuit protection, reverse protection, overheat protection and low voltage protection. Can achieve constant current, constant voltage, float charge, trickle charge state. Improve battery life. Reduce the rate of water loss and eliminate battery charging, charging drum.

Advantage

Smart mode:

When the user uses it for the first time, make sure that the switch is adjusted to the smart gear for charging. D uring the charging process, the charging current is automatically adjusted according to the battery size and battery status, and the charging is automatically stopped after charging to the set voltage value. This gear is full of self-stops.

Repair Mode:

Only the battery is below 11V voltage, this manual mode is for the battery internal resistance characteristics, professionally designed charging program, help repairing the battery function, so that the battery effect plays better, but the repair mode work must be carried out under manual care, in the battery shell has a slight heat when the repair is stopped. The notification repair time can be up to 1-2hours.

Attention:

1.Proper cooling fan operation: It is crucial to ensure that the cooling fan of the charger is functioning properly while charging the battery. The cooling fan helps dissipate heat generated during the charging process, preventing overheating and ensuring the charger's optimal performance.

2.Prohibited modes during lithium battery charging: To prevent damage to the lithium battery with different voltage values, it is important to avoid using other charging modes intended for different battery types. For a 12V lithium battery, the full charge voltage should be around 12.6V±0.2V, while a 24V lithium battery requires a full charge voltage of approximately 25.2V±0.2V.

3.Voltage identification display range: The charger has a voltage identification display range to indicate the voltage of the battery being charged. In the 12V mode, the charger can identify and display voltages within the range of 10V-15V, while in the 24V mode, it can identify and display voltages within the range of 20V-29V.

4.Manual monitoring for certain batteries: It is recommended to manually monitor the first charge of a leakage battery and batteries below 20AH. During this initial charging process, it is important to visually inspect the battery's appearance and the battery liquid to avoid overcharging and deformation of the drum. This manual monitoring helps ensure the battery's safety and integrity during charging.

Operation:

Step 1: Check the current voltage of the battery to be charged.

Step 2: Whether the output voltage of the charger matches.

Step 3: Connect the charger and the battery to be charged correctly as required.

Step 4: Check that the mains voltage matches the charger's rated input voltage.

Step 5: Connect the power and connect the battery, observe whether the indicator light is on, and whether the cooling fan is working when charging.

Step 6: If the charger is not working properly, quickly disconnect the mains and check the mains, battery and all connections. (Please contact customer service in time)

Feature:

Six charging protection:This charger has six charging protection designs: overheat protection, short circuit protection, reverse connection protection, low voltage protection, overvoltage protection and over-current protection, providing you with a full range of safe charging services.

Huge compatibility:Compatible with ordinary batteries and lithium batteries, suitable for 12V/24V (6-400AH) motorcycles, automobiles, small trucks, agricultural machinery, dry batteries, water batteries, lead-acid batteries, and lithium batteries.

Automatic identification:Automatically recognize the battery type, whether it is a 12V or 24V battery, plug in the battery charger to automatically recognize and switch to the corresponding charging mode.

Super power:260W super power, faster charging and higher efficiency, it can be fully charged in six hours, saving you valuable time.

Brand new design:The new appearance and unique slope design make it easier to observe the charging status. Dual-screen operation, real-time monitoring, more intuitive charging.

Cooling fan:The low-noise cooling fan can cool the overheated charger in time to avoid damage to the charger due to overheating and greatly extend the life of the charger.

Safety Precautions:

1. It is strictly prohibited to use the machine in the environment of humidity, high temperature, flammable and explosive substances or gases!

2. It is strictly prohibited to block the machine cooling air holes or fan damage in the state of use of the machine.

3. Strictly prohibited to the scrap, non-lead-acid batteries, or no voltage battery charging! Prohibit charging of non-rechargeable batteries! This charger is prohibited to charge lithium batteries, charging is prohibited near open flames! High voltage inside the machine is strictly prohibited to disassemble!

4 For indoor use, beware of rain. Charging process, must be guarded, charger is strictly prohibited to cover, must be placed in a well-ventilated place to use. It is strictly prohibited to be placed in the car or car charging, Road to prevent flames, Sparks and explosive gases, so as not to cause fire!

5. To charge the battery of the vehicle or equipment, please remove the battery, placed in a safe, no flammable objects around the environment for charging, otherwise accidents occur, your own responsibility!

6. The charger has a high pressure, dangerous, non-professionals are strictly prohibited to open or modify the machine, or bear the consequences!

7. If the power input cord is damaged, in order to avoid danger, it must be replaced by the manufacturer, maintenance department or similar professionals.

8. Before connecting or disconnecting the battery charger from the battery, disconnect the power supply!

Technical Parameters:

Rated input voltage range:110V-250V

Output voltage:12V/24V

Rated operating frequency:50/60HZ

Full load conversion efficiency:93%

Operating temperature range:-30°C-45°C

Charging mode:No load - constant current-constant pressure - float charge - trickle

FAQ:

Q: Why is the current getting smaller and smaller?The current is not 30A.

A: Charging principle: pulse. Pulse can protect the battery and prolong its service life.

The difference is that the pulse charger can keep the charging process dynamic, balance the charging and discharging process, reduce the water loss during the charging process, and prevent the problem of sulfation, so that the battery capacity can be restored and the battery life will be increased.

Pulse is not a constant voltage and current. It will match the charging voltage and current according to the battery status. The charging current will become smaller and smaller as the battery power increases.

The pulse is designed to better protect the battery from being injured due to overcharge.

Not all batteries can reach the peak current. If the battery capacity is large and the power loss is severe, the current will be higher.

Q: Are 12V/24V and lithium battery automatically compatible?

A: 1. Manual selection is required; 2. 12V/24V self-defined identification, lead-acid battery, water battery, dry battery. 3. Lithium battery: 12V, lithium iron phosphate battery cannot be charged (it depends on whether the charger supports 12.6V lithium battery)

Q: How to operate?

A: The first step is to check whether the battery is good or bad. Operation method: the charger is not plugged in, just clip the charger clip to the positive and negative poles of the battery. The display will show the current internal pressure of the battery. There are two conditions not shown: 1. Charger problem 2. Battery voltage is lower than 8V.

The second step is that the charger has normal input and output. Only plug in, and the display will be on. By default, 12V and POWER are on. When the red and black clips meet, the spark charger is completely normal.

Q:What is the differences between chargers?

A:1. Make sure what type of battery needs to be charged.
2.Different power sizes affect the charging time of the charger.

Q: What is the function of the charger?

A:1. Check the internal pressure of the battery; 2. Repair; 3. Charging.

Q: Why can't the battery reach the current you said?

A: Generally, the battery capacity is not large enough to give all the output current to the battery. I'm afraid that the battery can't bear it, which will make the battery damage.

P.S. Most of the batteries that need to be recharged with chargers have some problems

Q: Why cant the two 12V series connection recognize 24V for charging?

A: If the battery is a combination of two 12V batteries and can not directly identify the 24V charging, the internal pressure of the two batteries can be detected separately, and the large difference is unrecognizable. Two 12V batteries need to be charged separately

Q: Why does the display screen not light after plugging in?

A: 1.Plug in only, the display screen is not on, and the indicator light is not on. The safety tube is burnt and the product is defective

1. The 12V and power indicators are on. It may be that the display cable is loose. Maybe the display screen is broken