Home Companies Wuhan Geehe Optical Communication Co.,ltd

1m 62.5/125 OM1 Dulpex MTRJ-MTRJ Fiber Optic Patch Cord

Active Member

Contact Us

[China]

Address: Optical Valley Industrial Park, Wuhan, China

Contact name:Yu Ying

Wuhan Geehe Optical Communication Co.,ltd

1m 62.5/125 OM1 Dulpex MTRJ-MTRJ Fiber Optic Patch Cord

Country/Region	china
City & Province	wuhan hubei
Categories	Repeater

Product Details

1m MTRJ-MTRJ 62.5/125 OM1 Dulpex Orange Mulit Mode mode PVC Fiber Optic Cable

1.Basic Introduction:

With MTRJ to MTRJ termination, this high-quality fiber optic patch cable is specifically designed for ethernet, multimedia, or communication applications.

The MTRJ connector features an easy-to-use latch-type design similar to the RJ connector on a Cat5 patch cable and is half the size of the SC connector. With its small footprint design, the MTRJ connector can increase the port density.

The patented injection molding process provides each connection greater durability in resisting pulls, strains, and impacts from cabling install.

Each cable is 100% optically inspected and tested for insertion loss before you receive it.

2.Patch Cord Benefit & Features:

MTRJ Connector Dimensions: 7.5mm Height x 9.5mm Width x 56mm Depth
Maximum Connector Loss: 0.50 dB
Typical Connector Loss: 0.30 dB
Jacket Material: PVC (OFNR riser-rated)
Jacket OD: 2.8 mm
Maximum Tensile Load: 100 N/cm
Impact Resistance: 1,000 cycles
Flex Resistance: 5,000 cycles
Attenuation at 1300 nm: 1.0 dB/km
Attenuation at 850 nm: 3.5 dB/km

3.Fiber Optic Patch Cord Applications:

CATV, LAN, WAN, Test &Measurement
Fiber-optic communication networks
Fiber Laser
Telecommunication networks
Data communication Broadband system

4.Specification&Technology Parameter

Parameters		Value
Connector Type		LC/UPC,LC/UPC
Center Wavelength(nm)		1310 or 1550
Max.Insertion Loss(dB)		0.3
Min.Extinction Ratio(dB)		23
Min.Return Loss(UPC) (dB)		50
Min.Return Loss(APC) (dB)		60
Key Orientation		Slow Axis
Axis Alignment(deg)		±3
Operating Temperature(℃)		-20~+70
Storage Temperature(℃)		-40~+85
FIber Type		PM Panda Fiber

* For Device with connector.IL is 0.3dB higher,RL is 5dB lower,ER is 2dB lower.

* The default connector key is aligned to the slow axis.

5.LC to FC Connector Specification& Technology Parameter:

Parameter		Unit	Index
End-Face Type			PC	UPC	APC
IL		dB	SM: ≤0.3；MM ≤0.1
Repeatability		dB	≤0.1
interchangeability		dB	≤0.2
RL	SM	dB	≥50	≥50	≥50
	MM	dB	≥36(Without APC connector)
Mating Times			＞1000
Operating Temperature		℃	-40~ +80