Home Companies Wuhan Geehe Optical Communication Co.,ltd

Low Insertion LSZH 1.8mm Fiber Optic Patch Cord LC To LC

Active Member

Contact Us

[China]

Address: Optical Valley Industrial Park, Wuhan, China

Contact name:Yu Ying

Wuhan Geehe Optical Communication Co.,ltd

Low Insertion LSZH 1.8mm Fiber Optic Patch Cord LC To LC

Country/Region	china
City & Province	wuhan hubei
Categories	Connectors

Product Details

Low Insertion Single-Mode Simplex 1.8mm Fiber Optic Cable LC To LC Connector

Basic Introduction:

LC Apc fiber patch cord has good in repeatability and exchangeability and 100% Insertion, Return Loss, End Face, and Interference inspection.

Optical fiber is sensitive to stress, particularly bending stress. When overstressed, light in the outer part of the core is no longer guided in the fiber are core creating a higher loss at the stressed section of the fiber. Geehe's bend insensitive fiber patch cords (BIFPC) are constructed with Corning, by preventing as much bending loss as possible.

The cords are available with LC connectors in a variety of polishes and standard lengths of up to 30 meters.

Fiber Optic Patch Cord Benefit & Features:

Bend insensitive OM2, OM3, OM4, and OS2 type fibers
Conforms to IEC, EIA-TIA, and Telecordia performance requirements
Available in duplex configurations with clips
Low insertion loss
High return loss &high reliability& stability
Standard LC ,SC ,FC,ST, MU,MPO connector types
TIA color-coded connectors
Riser Rated (OFNR) jacket type
Precision ferrule end-face geometry
Factory polished tested and serialized

Fiber Optic Patch Cord Applications:

Use to carry signals in LANs, SANs and high-speed parallel interconnects for head-ends, central offices, and data centers

Use with vertical-cavity surface-emitting laser (VCSEL) or LED laser light sources in a LAN network

Add backward and forward compatibility to a high-speed data network

Specification&Technology Parameter

Parameters		Value
Connector Type		LC/UPC,LC/UPC
Center Wavelength(nm)		1310 or 1550
Max.Insertion Loss(dB)		0.3
Min.Extinction Ratio(dB)		23
Min.Return Loss(UPC) (dB)		50
Min.Return Loss(APC) (dB)		60
Key Orientation		Slow Axis
Axis Alignment(deg)		±3
Operating Temperature(℃)		-20~+70
Storage Temperature(℃)		-40~+85
FIber Type		PM Panda Fiber

* For Device with connector.IL is 0.3dB higher,RL is 5dB lower,ER is 2dB lower.

* The default connector key is aligned to the slow axis.

LC Connector Specification& Technology Parameter:

Parameter		Unit	Index
End-Face Type			PC	UPC	APC
IL		dB	SM: ≤0.3；MM ≤0.1
Repeatability		dB	≤0.1
interchangeability		dB	≤0.2
RL	SM	dB	≥50	≥50	≥50
	MM	dB	≥36(Without APC connector)
Mating Times			＞1000
Operating Temperature		℃	-40~ +80

LC Patch Cord Ordering Information:

OFC	-X	-XX	-XX	-XX	-X	-X
	S: Simplex D: Duplex	LA:LC/APC LC:LC/UPC LP:LC/PC	LA:LC/APC LC:LC:UPC LP:LC/PC	09:0.9mm 20:2.0mm 30:3.0mm	0:G652D 1:G657A 2:50/125 3:62.5/125 4:others	0.5:0.5m 1.0:1.5m 10:10.0m
	Fiber Mode	Connector Type	Connector Type	Cable Diameter	Flange Type	Fiber Length

* EX:OFC-D-LA-LA-09-1-1.0

You decide:

Fiber types (G652-D, G657A1, G657A2, ULTRA, G655, OM1, OM2, OM3, and OM4), also available in various types of cable.
Connector types (conform IEC 61753, 61754, 61755) such as SC/APC 8 degrees, LC/APC 8 degrees, E2000/APC 8 degrees, SC/PC, LC/PC, ST/PC, MTP, and LC Uniboot.
The required quality (A-, B-, C-, or D-grade).
Any length and color you need.
100% ceramic ferrule (standard for prime quality guarantee) or other ferrule types (on request)