Active Member
|
[China]
Address: Optical Valley Industrial Park, Wuhan, China
Contact name:Yu Ying
Wuhan Geehe Optical Communication Co.,ltd |
|
|
Multi-Mode Duplex 5M OFNR Yellow Jacket Fiber Jumper Patch Cord LC SC
1.Brief Introduction:
Geehe fiber optic patch cords provide the ideal medium for all your fiber optic interconnect applications. They are designed, manufactured, network equipment manufactured, wholesale, and tested according to protocol and performance dictated by the industry standards.
The quality of the components used to build our fiber optic patch cords ensures long-lasting and high repeatability connections.
Geehe also supply offers a wide variety of connector options, jacket colors, and diameter as well as different flammability ratings, and has the capability to custom build to meet your most stringent mechanical and performance specifications. All Geehe patch cords have an identification label and have a unique serial number assigned to them. On each of these labels the part number, serial number, and the length of the patch cord are displayed for easy product recognition and traceability.
2. Fiber Optic Patch Cord LC To SC Benefit & Features:
3.Fiber Optic Patch Cord Applications:
4.Specification&Technology Parameters
| Parameters | Value | ||||
| Connector Type | LC/UPC,LC/UPC | ||||
| Center Wavelength(nm) | 1310 or 1550 | ||||
| Max.Insertion Loss(dB) | 0.3 | ||||
| Min.Extinction Ratio(dB) | 23 | ||||
| Min.Return Loss(UPC) (dB) | 55 | ||||
| Min.Return Loss(APC) (dB) | 65 | ||||
| Key Orientation | Slow Axis | ||||
| Axis Alignment(deg) | ±3 | ||||
| Operating Temperature(℃) | -20~+70 | ||||
| Storage Temperature(℃) | -40~+85 | ||||
| FIber Type | PM Panda Fiber | ||||
* For Device with connector.IL is 0.3dB higher,RL is 5dB
lower,ER is 2dB lower.
* The default connector key is aligned to the slow axis.
5. Fiber patch cord LC to SC Specification& Technology Parameter:
| Parameter | Unit | Index | |||
| End-Face Type | PC | UPC | APC | ||
| IL | dB | SM: ≤0.3; MM ≤0.1 | |||
| Repeatability | dB | ≤0.1 | |||
| interchangeability | dB | ≤0.2 | |||
| RL | SM | dB | ≥50 | ≥55 | ≥65 |
| MM | dB | ≥36(Without APC connector) | |||
| Mating Times | ＞1000 | ||||
| Operating Temperature | ℃ | -40~ +80 | |||
5.LC Connector Ordering Information:
| OFC | -X | -XX | -XX | -XX | -X | -X |
| S: Simplex D: Duplex | LA:LC/APC LC:LC/UPC LP:LC/PC | LA:LC/APC LC:LC:UPC LP:LC/PC | 09:0.9mm 20:2.0mm 30:3.0mm | 0:G652D 1:G657A 2:50/125 3:62.5/125 4:others | 0.5:0.5m 1.0:1.5m 10:10.0m | |
| Fiber Mode | Connector Type | Connector Type | Cable Diameter | Flange Type | Fiber Length |
* EX:OFC-D-LA-LA-09-1-1.0
6.SC Connector Ordering Information:
| OFC | -X | -XX | -XX | -XX | -X | -X |
| S: Simplex D: Duplex | SA:LC/APC SC:LC/UPC SP:LC/PC | SA:LC/APC SC:LC:UPC SP:LC/PC | 09:0.9mm 20:2.0mm 30:3.0mm | 0:G652D 1:G657A 2:50/125 3:62.5/125 4:others | 0.5:0.5m 1.0:1.5m 10:10.0m | |
| Fiber Mode | Connector Type | Connector Type | Cable Diameter | Flange Type | Fiber Length |
7. How to choose Fiber patch cords?
1) Fiber Cable Mode: Single Mode or Multimode
The mode of fiber patch cables indicates how light beams travel within the fiber. There are two fiber cable modes: single mode and multimode.
2) Number of Fiber Strands: Simplex or Duplex
According to the number of fiber strands, there are simplex and duplex fiber patch cord. As shown in Figure 2, simplex fiber patch cord contains one single strand of fiber with one simplex connector on each end. It can be linked with a pair of BiDi transceiver modules featuring with one port. Whereas duplex fiber patch cord consists of two strands of glass or plastic with one duplex connector (or considered as two simplex connectors). It is often linked with common transceivers or dual fiber BiDi transceivers.
3) Choose the Right Cable Jacket Type (PVC/LSZH/OFNP/Armored)
Usually, there are three cable jacket types: Polyvinyl Chloride
(PVC), Low Smoke Zero Halogen (LSZH) and Optical Fiber
Nonconductive Plenum (OFNP). You can see there features in figure
below and choose the right one for your network.
4)Connector Type: LC, SC, ST or Others
There are many connector types used in fiber patch cables such as
LC, SC, ST, MTP or MPO listed in this article How Many Fiber
Connector Types Do You Know? Aside from these connectors, there is
a latest connector design called MDC connector, which enables the
highest achievable connector density by delivering a 3X advantage
over a standard LC connector. The different connector types are to
plug into different interfaces, so you’d better affirm the
interface type of the devices you are using the first time.
5)Choose the Right Connector Polish Type (UPC/APC)
Since the loss of the APC connector is lower than UPC connectors,
usually, the optical performance of APC connectors is better than
UPC connectors. In the current market, the APC connectors are
widely used in applications such as FTTx, passive optical network
(PON) and wavelength-division multiplexing (WDM) that are more
sensitive to return loss. But APC connector is usually expensive
than UPC connector, so you should weigh the pros and cons. With
those applications that call for high precision optical fiber
signaling, APC should be the first consideration, but less
sensitive digital systems will perform equally well using UPC.
Usually, connector color of APC patch cable is green, and of UPC
patch cable is blue.
8. Geehe Service:
