Home Companies  Fiberall Technology (Shenzhen) Co., Ltd

Swing Out Type Rack Mounted Fiber Optic Patch Panel With LC Duplex Adapter

 Fiberall Technology (Shenzhen) Co., Ltd
Active Member

Contact Us

[China] country

Address: 3F, Huayang Bldg, Minwang Rd, Minzhi Sub-district, Longhua District, Shenzhen, Guangdong, China

Contact name:Tao

Inquir Now

 Fiberall Technology (Shenzhen) Co., Ltd

Swing Out Type Rack Mounted Fiber Optic Patch Panel With LC Duplex Adapter

Country/Region china
City & Province shenzhen guangdong
InquireNow

Product Details

FA-FDR1MR48B-LCP,Swing Out Type Rack Mounted Fiber Optic Patch Panel With LC Duplex Adapter

 

FA-FDR1MR48B-LCP fiber patch panel is suitable for zero water peak fiber, also known as full wavelength fiber. In the traditional manufacturing process of single-mode fiber, there is a light absorption peak called peak water at 1400nm wavelength, the absorption peaks is resulted by hydroxyl ion absorption. The water peaks increase attenuation losses in this particular region. With the research and development of higher transmission rate applications such as 40Gb/s, multi-channel wavelength division multiplexing (WDM- wavelength division multiplexing) is adopted more and more. The traditional single-mode fiber makes 4 channels in E-band cannot be used at the 1400nm water peak region, so it cannot get the best results.

In order to solve the defects of traditional single-mode fiber in multi-channel wavelength division multiplexing (CWDM), a new single-mode fiber named "zero water peak" single-mode fiber is adopted. The high attenuation in the water peak region must be eliminated in order to use the full spectral range. There is no hydroxyl ions in manufacturing of zero water peak fiber, thus it can obtain better attenuation control in the 1400nm region. By eliminating water peaks, not only CWDM technology can be used in E- band, but also it becomes an ideal single-mode optical fiber for high-speed communication.

At present, zero water peak single-mode fiber beyond new index of G.652.D, and it eliminate the influence factors of 1400nm water peak, thus providing a wider transmission bandwidth for users, users can freely use all wavelength from 1260nm to 1620nm, so the transmission channel is enlarged from the previous 240 to 400, 50% available bandwidth is more than conventional single-mode fiber and it provide a solid foundation for coarse wavelength division multiplexing CWDM to upgrade to 100G bandwidth in the future.

 

Main Parameters Of Rotate Fiber Patch Panel

 

Installation wayRack Mounted on standard frame or cabinet
Box MaterialCold-rolled metal sheet
SprayingBlack ( Grey for option)
Fiber Cassette2 Fiber tray ( 12 or 24 fibers each tray)
Cable inlet2-4 entry ports on rear, left side and right side
Adapter TypeLC Duplex , SC Simplex
Working temperature-40ºC to + 60ºC
Compliant standardsTIA/EIA568.C, ISO/IEC 11801, En50173, IEC60304, IEC61754, EN-297-1
Curvature radius≥40mm
Fiber pigtailDefault 0.9mm 12 colors 1.5m
Lateral pressure-resistance500N
Working temperature-25ºC~+45ºC
Atmosphere pressure70~106Kpa
Insulated Resistance2×10MΩ/500V(DC)

Hot Products

FA-FDF1DM24B-SC,SC Rack Mounted Fiber Patch Panel With Spray-paint Distribution From Back Side ...
FA-FDR1MD24J,Sliding Drawer Type Fiber Patch Panel With MTRJ Optical Adapter And Pigtail Bending ...
FA-FDR1MR48B-LCP,Swing Out Type Rack Mounted Fiber Optic Patch Panel With LC Duplex Adapter FA...
FAPC-APAPM2, High Power Optical Fiber Patch Cord SMA905 to SMA 905 MM OM1 62.5/125μm Duplex SMA ...
FAPC-APAPM2M,Duplex SMA Fiber Optic Patch Cable With Metal Ferrule And 3.0mm Multi-Mode Cable SMA ...
FAPC-APAPS1,SM 9/125 simplex fiber optic SMA to SMA patch cord with stainless steel ferrule There ...