Active Member
|
[China]
Address: 3F, Huayang Bldg, Minwang Rd, Minzhi Sub-district, Longhua District, Shenzhen, Guangdong, China
Contact name:Tao
Fiberall Technology (Shenzhen) Co., Ltd |
|
|
FA-TCU10R45-0.3, 10 Gigabit Copper SFP+ Transceiver With RJ45 Plug 10GBASE-T SFP+ Module for Cat6 cable with 30m reach
Copper SFP is electrical SFP transceiver with RJ45 interface. Fiberall provide 10Gbase-T, 5Gbase-T/2.5Gbase-t, 10/100/1000BASE-T and 1000BAST-T copper SFP and we also offer 1000BASE-T Copper GBIC transceiver. But 10/100/1000BASE-T is used with SGMII interface but 1000BAST-T use with SERDES interface.
SGMII is the interface between PHY and MAC, it is serial and do not need to provide extra clock, but MAC and PHY need CDR to recover the clock. Otherwise, SGMII is with 8B/10b code and the data rate is 1.25Gbps.
Fiberall SFP+-10GBASE-T Copper Small Form Pluggable (SFP) transceivers are based on the SFP Multi Source Agreement (MSA) . They are compatible with the 10Gbase-T / 5Gbase-T / 2.5Gbase-T / 1000base-T standards as specified in IEEE Std 802.3 . SFP+-10GBASE-T uses the SFP's RX_LOS pin for link indication. If pull up SFP's TX_DISABLE pin, PHY IC be reset.
Main Characteristics Of Copper SFP+
1, Support multi rate 10Gbase-T / 5Gbase-T / 2.5Gbase-T / 1000base-T;
2, Hot-pluggable SFP footprint;
3, With standard RJ-45 connector;
4, RoHS compliant and lead-free;
5, Single +3.3V power supply;
6, 10 Gigabit Ethernet over Cat 6a cable;
7, Ambient Operating temperature: 0°C to +65°C.
Order Information Of Fiberall Copper SFP+ Transceiver
| Standard | Cable | Distance | Host Port |
| 10Gbase-T | CAT6A | 30m | XFI |
| 5Gbase-T/2.5Gbase-t | CAT5E | 50m | 5GBase-R/2.5GBase-X |
| 1000base-T | CAT5E | 100m | 1000base-FX |
SFP to Host Connector Pin Out Of FA-TCU10R45-0.3
| Pin | Symbol | Name/Description | Ref. |
| 1 | VEET | Transmitter Ground (Common with Receiver Ground) | 1 |
| 2 | TFAULT | Transmitter Fault. Not supported. | |
| 3 | TDIS | Transmitter Disable. Laser output disabled on high or open. | 2 |
| 4 | MOD_DEF(2) | Module Definition 2. Data line for Serial ID. | 3 |
| 5 | MOD_DEF(1) | Module Definition 1. Clock line for Serial ID. | 3 |
| 6 | MOD_DEF(0) | Module Definition 0. Grounded within the module. | 3 |
| 7 | Rate Select | No connection required | |
| 8 | LOS | High indicates no linked. low indicates linked. | 4 |
| 9 | VEER | Receiver Ground (Common with Transmitter Ground) | 1 |
| 10 | VEER | Receiver Ground (Common with Transmitter Ground) | 1 |
| 11 | VEER | Receiver Ground (Common with Transmitter Ground) | 1 |
| 12 | RD- | Receiver Inverted DATA out. AC Coupled | |
| 13 | RD+ | Receiver Non-inverted DATA out. AC Coupled | |
| 14 | VEER | Receiver Ground (Common with Transmitter Ground) | 1 |
| 15 | VCCR | Receiver Power Supply | |
| 16 | VCCT | Transmitter Power Supply | |
| 17 | VEET | Transmitter Ground (Common with Receiver Ground) | 1 |
| 18 | TD+ | Transmitter Non-Inverted DATA in. AC Coupled. | |
| 19 | TD- | Transmitter Inverted DATA in. AC Coupled. | |
| 20 | VEET | Transmitter Ground (Common with Receiver Ground) | 1 |
