Active Member
|
[China]
Address: 3F, Huayang Bldg, Minwang Rd, Minzhi Sub-district, Longhua District, Shenzhen, Guangdong, China
Contact name:Tao
Fiberall Technology (Shenzhen) Co., Ltd |
|
|
FA-EONU8009 , FTTB ONU for Epon with One PON Port 8 LAN Ports And 1 CATV Port
Fiberall ONU use unified open hardware and software architecture , and it is able to provide powerful network management function and realize flexible network construction and management of the system , it is easy to operate , easy to manage and easy to maintain . Meanwhile it is with CATV RF characteristics , support multiple VLAN and VLAN conversion so it can help to users on fast construction of fiber to the building ( FTTB ) and fiber to the home ( FTTH ).
FA-EONU8009 EPON ONU fully complies with IEEE 802.3-2005 and the China Telecom EPON device technical specification ( V2.1 ). It is operative, manageable and maintainable at telecommunication level , and can provide high speed data service for customers . It has a PON uplink port that connects to office end apparatus through optical fiber .
Product features Of FA-EONU8009
Conform to IEEE802.3ah standard and meet CTC V2.1 technical requirements
Support Ethernet service layer 2 switching and wire-speed forwarding of uplink and downlink services
Support frame filtering and suppression
Support standard 802.1Q Vlan function, support VLAN conversion
Support 4094 VLANs (802.1Q)
Support Dynamic Bandwidth Allocation (DBA) function
Support QoS, including traffic flow classification, priority marking, queue and dispatch, traffic shaping and traffic control, etc
Single ONU supports up to 8 LLID.
Support IGMP Snooping
Support Ethernet port rate limit loop detection
Support power failure alarm
Support lightning protection for power supply and lightning protection for service port
CATV radio frequency feature ( optional , if you do not need CATV, please choose product part number FA-EONU8008 )
Physical Technical Parameters
| Port Features | 1 PON port (1.25G) |
| 8 10/100M port | |
| 1 CATV port( FA-EONU8008 do not have this interface) | |
| Output Level | 85dBuv ( input-6dbm ) |
| AGC Working Range | 10dB CNR ≥46dB@-6dBm ( input ) |
| Physical Dimension | 259x119x30 ( L×W×H, mm ) |
| Power Supply | 5VDC |
| Power Consumption | 7W |
| Working Temperature | -10～55℃ |
| Storage Temperature | -30～60℃ |
| Relative Humidity | 10～90% (non-condensing) |
Fiber Characteristics
| WDM | Support Bidirectional or Triplexer |
| Fiber Connector Type | SC / PC or SC / APC |
| Maximum Fiber Channel | 1 x 32 |
| Speed Rate | 1.25Gbps ( Upstream and Downstream ) |
| Transmitting Wavelength | 1310nm |
| Receiving Wavelength | 1490nm |
| Output Optical Power | -1 to +4 dBm |
| Receiver Sensitivity | < -26dBm |
| Max. Distance Between ONU and OLT | 20 KM |
