Active Member
|
[China]
Address: 3F, Huayang Bldg, Minwang Rd, Minzhi Sub-district, Longhua District, Shenzhen, Guangdong, China
Contact name:Tao
Fiberall Technology (Shenzhen) Co., Ltd |
|
|
FA-FDR1MD24B , Slide Out Drawer Type Optical Fiber Patch Panel With 24 SC MM Fiber Pigtail
The Surface Treatment Of Fiber Optic Patch Panel
Plastic spraying, also named spraying plastics or electrostatic spray, is a kind of surface treatment method of spraying plastic powder on parts. Plastic spraying is also often referred to the electrostatic powder spray coating, it is a metal surface treatment technology widely used in the world since 1980s. Compared with the ordinary surface treatment, the advantages of this technology are energy saving, high efficiency, safety and reliability. Therefore, it is often used in the field of light industry and home decoration. The working principle is that the plastic powder by high voltage electrostatic charging equipment, under the action of electric field, the coating is sprayed onto the surface of the workpiece, powder can be uniformly adsorbed on the surface of the workpiece and formed to be a powdery coating; after high temperature baking and leveling curing, plastic particles will melt into the final coating protection, firmly attached to the surface of the workpiece.
Electrostatic spray has no environmental pollution, no harm to the human body; the coating appearance is with excellent adhesion and strong mechanical strength and it need very short curing time; with the spraying, corrosion and wear resistance of the fiber optic patch panel is much higher.
Fiber Optic Patch Panel Complies To The Following Standards
GB/T5267-2002 ( Standard for electroplated coatings on threaded fasteners)
YD/T988-2007 (China national communication industry standard for fiber optical distribution box)
TIA/EIA 568.C, ISO/IEC 11801, ENS50173, IEC60304, IEC61754, EN297-1
ANSI/TIA/EIA-606-A (Administration Standard for Telecommunications
Infrastructure)
CEA/EIA-310-E (Cabinets, Racks, Panels and Associated Equipment
standard)
GR-449-CORE (Generic Requirements and Design Consideration for
Fiber Distributing Frames)
UL 94 (Tests for Flammability of Plastic Material for Parts in
Devices and Appliances.)
RoHS (Directive on Restriction of Hazardous Substances)
Specifications Of FA-FDR1MD24B
| Fiber Patch Panel | SC MM Pigtail | ||
| Dimension | 1U Height 19 inch Width | Insertion Loss | <0.3dB |
| Material | 1.2mm Cold Rolled Steel | Return Loss | MM >40dB |
| Painting Color | Black | Mating durability | >500 Mating Cycles |
| Humidity | 0-90%, non-condensing | Wavelength | MM 850 to 1300nm |
| Operating Temperature | -10°C to 60°C | Spec | 0.9mm 1.5m PVC or LSZH |
| Storage Temperature | -40°C to 85°C | ROHS Compliant | Yes |
