Active Member
|
[China]
Address: 3F, Huayang Bldg, Minwang Rd, Minzhi Sub-district, Longhua District, Shenzhen, Guangdong, China
Contact name:Tao
Fiberall Technology (Shenzhen) Co., Ltd |
|
|
FA-EOLT8604-B OLT Optical Line Terminal For EPON With 4 , 8, 12 PON
FA-EOLT8604-B is a miniaturization and modularization GEPON OLT and broadband fiber access system platform. It is fully compliant to IEEE802.3-2005 and Chinese technical requirements of Ethernet Passive Optical Network (EPON). This product supports integrated access service, such as broadband surf-netting, IP voice, IPTV, CATV and etc.
What’s ONT and its relation with ONU and OLT?
ONT is the short form of Optical Network Terminal, it is also a very important device in xPon access network. Its function is similar to ONU but ONT is a terminal device of the fiber network and it may have other network between ONU and users, like Ethernet. The downlink of ONU can be expanded to xDSL(adsl,vdsl) or other gateway device with Ethernet uplink port then connect to the terminal device.
Special Features Of FA-EOLT8604-B
1 U height, adopt full front-wiring, small size, high capacity, maximum EPON optical fiber interfaces reach up to 12.
Provide single main control module, single power supply module and 4 service interface modules.
Support flexible controllable multi-cast, IGMP Proxy/Snooping and etc.
Support strong VLAN extension functions, including VLAN Stacking/Trunk/Translation, etc.
Support flexible DBA, uplink/downlink service rate-limited, precision up to 0.2% (Standard requirement<5%)
Adopt multi LLID and IEEE802.1p technologies, provide multi protection QoS service
Equipment Components
| Index | Component name | Full capacity | Specification |
| 1 | subrack | 1 | OLT equipment chassis |
| 2 | SWA card | 1 | 1 FE port,1 debug serial port, hot-swappable cards,10Gigabit non-blocking switching. |
| 3 | EP4 cards | 3 | Hot-swappable 4-port PON cards, conformance with IEEE802.3 2005 EPON standard, support up to 20 km transmission distance. |
| 4 | HUP card | 1 | Hot-swappable uplink card, 4-port SFP and 1-port XFP , support 4GE+1XG |
| 5 | FAN card | 1 | FAN card |
| 6 | PWR card | 1 | Power card, support 220V AC power supply/48V DC power supply dual input. |
Hardware features
| Devices parameter | Dimensions (mm) | 482x 43.6x385 (W*H*D) |
| Weight | 3.2Kg | |
| Rating Power consumption | ≤80W | |
| working environment | Environment temperature:0℃～+45℃；Environment humidity:10%-90%,no condensation | |
| Storage environment | Environment temperature:-25℃～+70℃；Environment humidity:10%-90%,no condensation | |
| Power | DC | -46～-50.4V DC |
| AC | 90～264V AC |
Advanced Features
| Character | Indicator |
| Switch functions | 10Gigabit switch backplanes(the bandwidth of switch backplane is 60Gbps); non-locking wire speed switch ability; 8K MAC address table; 2K multicast table; 4K VLAN(802.1Q); Support link aggregation of 4 GE port and 1 10GE port(IEEE502.ad). Support 3 trunk groups; Support port-based mirror. |
| VLAN | Support 4K IEEE802.1Q VLAN , , , VLAN Stacking/Trunk /Translation ,QINQ and etc. |
| RSTP | Support RSTP |
| IGMP | Support IGMPv1 V2 protocol and IGMP snooping/proxy |
| QoS and ACL | Support CAR(Committed Access Rate).The granularity of traffic speed limit is 64Kbps; Support tagging priorities based on port ID, MAC address, VLAN , 802.1p.,diffserve and IP TOS remark. Support flexible queue scheduling algorithms, user can set algorithms based on port and queue. Support four queue scheduling strategies: strict , weight ,rotate, and strict+weight. Provide filter function based on source MAC address , source IP address, destination IP address, source port and destination port etc. Support QoS Profile management, Users can define their own QoS service plan. |
| Storm inhibit | Support broadcast, multicast and DLF broadcast storm inhibition. Broadcast storm inhibition is according to the number of packets per second (PPS). |
| Flow control | Support IEEE802.3X flow control under the full-duplex. Support back pressure type flow control under half-duplex mode. |
| Encryption and safety | Support LLID MAC address binding, control ONU register. To prevent illegal ONU accessing. Support segregation of control under the same EPON ONU network. Support encryption startup control configuration |
| Line diagnosis | Support PON line diagnosis by ping and link test. |
| Configuration recovery | Support ONU offline configuration, configure automatic issued when register |
| Management mode | Telnet,Console； Support in-band and out-band management, SNMP V1/V2 and OAM； |
| Management function | Support device configuration management, performance management, fault management, resource management, safety management etc. Support remote management ONU, remote batch download configuration and Remote automatic software upgrade. Support ONU offline configuration, configure automatic issued when register. Support ONU line diagnosis and distance measurement function. |
| Redundant backup | Support AC/DC double power supply protection. |
