Active Member
|
[China]
Address: Xingyang Industrial Park,Zhengzhou,Henan,China
Contact name:Andie Tian
BH Mortar Industrial Co., Ltd. |
|
|
Easy operation dry waterproof cement mix mortar plant dry mortar plant
Description:
Semi-automatic dry powder mortar production line construction mortar production line can meet the production needs of dry powder mortar, dry powder materials, dry powder binder, etc., such as: putty powder, dry powder coating, masonry mortar, plastering mortar, insulation system Various dry mortars such as mortar and decorative mortar; and have many advantages such as small footprint, low investment, quick effect, and simple operation.
Main configuration:
Batch conveyor, high-efficiency mixer, finished product warehouse,
homogenizer (secondary stirring to prevent segregation), automatic
metering packaging machine, pulse dust collector, bracket, ladder,
platform, guardrail, electrical control cabinet and so on.
Working principlesof BH dry mortar plant :
When the machine is working and mixing, the material in the machine is subjected to two opposite directions of the rotor, and the composite motion is carried out. The blade and the animal material rotate counterclockwise along the inner wall of the machine slot, and on the other hand, the animal material is turned left and right, and the two rotors are overlapped and overlapped. Weight loss zone, in which the material floats in an instantaneous weightless state regardless of the shape, size, and density of the material, which causes the material to form an omnidirectional continuous cycle in the machine slot, interlacing and shearing, thereby achieving Quickly mix gently and evenly.
Performance characteristics:
The whole set of equipment is optimized, the layout is reasonable,
the operation is simple, the production efficiency is high, and 3-5
people can produce. It has the advantages of uniform material
mixing, no dead angle, short mixing time, long service life, easy
maintenance and low failure rate, especially a medium-sized
production equipment ideal for mortar production enterprises.
Operating procedures:
| 1) Turn on the power. Wipe the stirring pot and the stirring blade with a damp cloth before mixing. |
| 2) Pour the weighed cement and standard sand into the mixing pot. |
| 3) Start the machine, add water after mixing for 5s, and add it in 20s-30s. |
| 4) Stop the machine for 180±5s from the start of the machine. |
| 5) Scrape the rubber sand stuck on the blade and remove the stirring pot. |
| 6) After the end of the operation, the mixing blade and the stirring pot should be cleaned in time. |
Maintenance:
1. It is necessary to lubricate parts that are not ideal for
lubrication.
2. Different parts should choose different lubricants
3. Care and lubrication of the location in the machine or where it
is extremely fragile
4. When the new equipment is running for more than 50 hours, it is
necessary to change the oil. When it is working for half a year to
one year, the oil should be inspected and replaced.
Installatiion site photo:
Packaging and delivery:
