Active Member
|
[China]
Address: Xingyang Industrial Park,Zhengzhou,Henan,China
Contact name:Andie Tian
BH Mortar Industrial Co., Ltd. |
|
|
Automatic improved dry mortar mixer machine pre-mixe dry mortar plant
Description:
Full Auto Dry Mix Mortar Mixing Production features at manually feeding various coarse Materials Into Feed Bin,Under the Automatic Control System,This Production Line Can Realize Automation in Dust Collecting,Mixing,Filling and Packing.Occupation Area of Dry Mortar Plant: Around 80-100m2,Equipment Height:8m.Capacity at 10-120T/H.Manpower required:3-4 People.This Production Line is Ideal Selection for Set Up a Dry Mortar Factory with Reasonable Price,and Quick Refund.
Advantages of main components:
Mixer
By means of streamlined design, the contact area between the mixing
arm and the material increases, and the blades on the two shafts
work in a convective state, thus effectively forming the shear and
diffusion of particles.
Biaxial agitation without gravity can prevent the separation of
material and greatly improve the mixing efficiency. Ordinary mortar
can mix the material more than 90% evenly in 30 seconds.
Metering System
●Accurate raw material measurement-----The cement powder is metered
by a screw conveyor, and the sand material is metered by a precise
metering valve. The powder admixture is controlled by a unique
ultra-fine 114 screw machine with a suitable frequency converter.
●All weighing electrical components of each weighing hopper adopt a
joint venture brand
●It has excellent anti-interference, anti-impact and
anti-electromagnetic performance, and the measurement accuracy of
admixture can reach ±0.5%.
Dryer
It can make full use of the waste heat, reduce the heat loss,
increase the heat exchange area, and greatly improve the
evaporation intensity per unit volume of the dryer, thus
effectively improve the utilization rate of the heat energy and
reduce the energy consumption. The thermal efficiency of the
three-barrel dryer is greatly improved.
Compared with the single-cylinder dryer with the same efficiency,
the thermal efficiency is improved by about 50%, and the energy
consumption is saved by more than once; and compared with the
double-cylinder dryer with the same efficiency, the thermal
efficiency is improved by about 25%, and the energy consumption is
saved by more than 50%.
Sand Making System
| ◆Large capacity and high output-----VSI sand-making machine has a 30% increase in output and stable operation compared with traditional equipment under the same power. |
| ◆Excellent grain shape-----cube shape, good grain shape, reasonable gradation, adjustable fineness modulus; especially suitable for artificial sand making and stone shaping, practice has proved that compared with other traditional equipment sand making, the shaping effect is increased by 30%; |
| ◆Pay attention to environmental protection-----sand making equipment work noise is small, no pollution. The unique air self-circulation system greatly reduces the exhaust air volume, reduces the dust, and is conducive to environmental protection. |
| ◆Low consumption of vulnerable parts----optimal design of crushing chamber material impact angle, less friction with wear resistant parts, 30% lower operation cost than traditional equipment, which directly reduces the use cost of the equipment. |
Installation site photo:
