Active Member
|
[China]
Address: Yixie Technology Building, No. 10, Shanquan Road, Yongtou, Chang'an Town, Dongguan City
Contact name:Wen
Dongguan Yixie Automation Equipment Co., Ltd. |
|
|
EXE-880F Milling Cutter Depaneling Machine Above Vacuuming
EXE-880F Milling Cutter Depaneling Machine Above Vacuuming Parameters:
| keywords | Vacuuming On The Milling Cutter Splitter | Split plate stress value | Below 300uε |
| Single side working size | 290mm X 350mm | NSK spindle speed | Max.60,000rpm |
| Four-axis servo drive | X, Y1, Y2, Z | Tool diameter | 0.8-2.3mm |
| X-Y AC Servo Speed | 0-1000mm/sec | PCB board cutting thickness | 0.2mm-6.0mm |
| Z AC Servo speed | 0-800mm/sec | Dust collector power | 2HP (upper vacuum) |
| X-Y repeatability | ±0.01mm | Dust cabinet size | 640mm×785mm×1760mm(D×W×H) |
| Cutting accuracy | ±0.02mm | Machine size | 1075mm×1430mm×1460mm(D×W×H) |
| CCD camera calibration accuracy | ±0.01mm | Host + dust collector weight | 800KG |
Introduction To Equipment Configuration:
Features of upper vacuum: The milling cutter splitter is also
called the curve splitter. It uses an electrostatic brush to seal
the cutting point. It vacuums independently for a single cutting
point and greatly improves the vacuuming effect.
1. Grating safety facilities are installed in the PCB pick-and-place area of the double Y-axis worktable of the milling cutter splitter to avoid manual misoperation and meet public safety requirements.
2. The window operation interface is friendly to switching between Chinese and English. The window operation interface is shown in the figure. The editing program is simple and can quickly complete the multi-point program.
3. Multi-layer management authority of software users to prevent misuse and other behaviors.
4. The software sets the milling cutter segmentation function, automatically lowers the cutter compensation, prolongs the service life of the milling cutter and reduces the cost.
Quality Assurance And After-sales Service:
1. The overall equipment warranty period is one year. If there are
quality problems, after-sales maintenance and replacement will be
provided free of charge.
2. The after-sales service personnel are all senior professional
and technical personnel of the company. After the company's formal
training, they can work alone after passing the examination.
3. After the after-sales department receives the notification of
equipment failure, if the equipment fails to work normally, it will
reply within half an hour within the Pearl River Delta, and
dispatch personnel to the scene to solve the problem within 2
hours; reply within half an hour outside the Pearl River Delta, and
then According to the specific situation, dispatch after-sales
personnel to the scene to solve the problem within 24 hours. (If
the startup cannot be produced normally, the after-sales personnel
communicate with the customer and arrive at the scene within the
time required by the customer).
4. The company's after-sales personnel are on standby 24 hours a
day, regardless of Saturdays, Sundays and holidays.
5. After the equipment arrives at your company, our company
arranges engineering and technical personnel to install and debug
it.
6. Our company can arrange after-sales technicians to stay in the
customer's company for three days, responsible for training and
technical guidance (the time can be extended according to the
customer's appropriate requirements) until they are accepted.
7. Our company's after-sales technicians are responsible for
comprehensive training. Your company's operators and technicians
will serve the installation and operation of our company's
equipment wholeheartedly without reservation.
8. Under the premise of the customer company's request, our company
can help the customer company to carry out the operation and
debugging test of the sub-board machine for its technical
personnel.
