Active Member
|
[China]
Address: Yixie Technology Building, No. 10, Shanquan Road, Yongtou, Chang'an Town, Dongguan City
Contact name:Wen
Dongguan Yixie Automation Equipment Co., Ltd. |
|
|
Double-Spindle Online Milling Cutter Automatic Depaneling Machine EXE91OLAT
Double-Spindle Online Milling Cutter Automatic Depaneling Machine EXE91OLAT Parameters:
| Sub-board work range | 300mmx350mm | power consumption | 3.5kva |
| XYZ drive mode | AC Servo Motor | Static Elimination Gun | |
| Number of motion axes | 9 axes | visual system | high-resolution digital camera |
| program teaching method | Color CCD video intuitive teaching input | drive motor | AC brushless servo motor |
| Operation interface | win7 window interface | Mechanical pick and place arm | Anti-static vacuum nozzle |
| Upper vacuum power | 3hp (option 5hp) | Feeding method | rail traffic |
| Cutting spindle sycotec (Germany) | Outlet method | Belt conveying or carrier output or rail conveying | |
| x-y ac servo speed | 0-1000mm/sec | transfer method | Vacuum suction nozzle adsorption transfer |
| z ac servo speed | 0-800mm/sec | flow direction | left→right |
| x-y repeatability | ±0.01mm | program backup | USB interface |
| Cutting accuracy | ±0.02mm | control method | Dedicated controller |
| CCD camera calibration accuracy | ±0.01mm | Dust cabinet size | 640mm×785mm×1760mm(d×w×h) |
| Split plate stress value | Below 300uε | Machine size | 2014mm×1230mm×1650mm(d×w×h) |
| Tool diameter | 0.8-2.3mm | Host + dust collector weight | 1000kg |
| PCB board cutting thickness | 0.2mm-6.0mm | Main engine and dust collector voltage | 220v 1φ and 3φ |
2. Introduction to equipment configuration
1. Double worktable structure
It adopts dual slide rails and cylinders to operate on dual
platforms. It can cut different types of products at the same time,
greatly reducing the waiting time for picking up and placing
plates. At the same time, the dual platforms can be changed to
large single platforms to increase the working size and greatly
improve the equipment. flexibility.
2. Lower vacuum spindle structure
1. The EXE910LAT dual-spindle online milling cutter adopts a
high-speed imported spindle to cut the plate, which greatly reduces
the cutting stress, with high precision, small inertia and fast
response.
2. The milling cutter detection system monitors the milling cutter
status in real time and effectively prevents the cutter from
continuing to run after the cutter is broken.
3. The new visual system, uniform ring light source, with
brightness adjustment function, makes various types of Mark points
better identify, and adapt to such as tin-plated, copper-plated,
gold-plated, tin-sprayed, and various types of PCBs with different
colors. The whole system is equipped with a vision Alignment
compensation function.
3. Lower vacuuming method structure
1. Funnel-type seal design, the suction port adopts a 45-degree
bevel to reduce the eddy current generated by the dust inside.
4. CNC dedicated controller
1. The independent CNC dedicated controller integrates the control
part, with strong loop control stability, high precision, fast
response and transmission, and strong anti-interference.
5. Dust collector
1. It adopts high-efficiency motor and fan blades, with high
suction power, a built-in polyester needle-punched felt dust bag
with high porosity, good air permeability, strong oxidation
resistance, and noise can be controlled within 80 decibels.
Quality Assurance And After-sales Service:
1. The warranty period of the whole equipment of EXE910LAT
dual-spindle online milling cutter and splitter is one year, and
after-sales maintenance and replacement are provided free of charge
if there are quality problems.
2. The after-sales service personnel are all senior professional
and technical personnel of the company. After the company's formal
training, they can work alone after passing the examination.
3. After the after-sales department receives the notification of
equipment failure, if the equipment fails to work normally, it will
reply within half an hour within the Pearl River Delta, and
dispatch personnel to the scene to solve the problem within 2
hours; reply within half an hour outside the Pearl River Delta, and
then According to the specific situation, after-sales personnel
will be dispatched to the scene to solve the problem within 24
hours. (If the startup cannot be produced normally, the after-sales
personnel communicate with the customer and arrive at the scene
within the time required by the customer).
4. The company's after-sales personnel are on standby 24 hours a
day, regardless of Saturdays, Sundays and holidays.
5. After the equipment arrives at your company, our company
arranges engineering and technical personnel to install and debug
it.
6. Our company can arrange after-sales technicians to stay in the
customer's company for three days, responsible for training and
technical guidance (the time can be extended according to the
customer's appropriate requirements) until they are accepted.
7. Our company's after-sales technicians are responsible for
comprehensive training. Your company's operators and technicians
will provide full service to the installation and operation of our
company's equipment without reservation.
8. If the customer company has the requirement, our company can
help the customer company to carry out the operation and debugging
test of the sub-board machine for its technical personnel.
