|
[China]
Trade Verify
Address: No.48, Baihao Industrial Street, Houjie Town, Dongguan City, Guangdong Province, China
Contact name:Andy
DONGGUAN WIREMAC MACHINERY EQPT. CO., LTD. |
|
Verified Suppliers
|
|
|
24D Economical Fine Wire Wet Drawing Machine Quick And Budget-Friendly
Introduction
The automatic wire arrangement compensation controller is mainly used in the occasions where the flatness of the wire arrangement is relatively high, which has been convenient for the next pay off or no wire clamping during the strand. The wire arrangement controller can be matched with any brand of small wire drawing machine and micro drawing machine, and can be used in the metal wire drawing industries such as copper wire, aluminum wire, stainless steel wire, brass wire, copper-clad aluminum wire, enamelled wire, etc.
At present, the traditional wire setter of small drawing machine or micro drawing machine in the market is controlled by synchronous motor + 2 position limit switches. In the process of wire arrangement, the operator needs to continuously adjust the edge distance of wire arrangement. There are generally two kinds of i-wheels for take-up: iron disc and ABS plastic disc. There are many iron discs on small pullers, and ABS plastic disc is generally used for take-up of micro pullers. When the outgoing line of the take-up I-wheel is deformed or the i-wheels of different manufacturers are used (there are appropriate errors between the i-wheels of different manufacturers), the error of the I-wheel itself will lead to the "rise" or "depression" of the outgoing line at different times. In this case, the operator needs to adjust the limit position of the wiring from time to time, A little negligence will cause the product to be scrapped or the next pay off wire cannot be released. When the take-up I-wheel adopts ABS plastic I-wheel, the wiring is stable when the tray is empty. When the tray is close to full, the plastic wheel will rise slightly to varying degrees. At this time, it is necessary to manually adjust the limit position switch of the wiring, which not only increases the strength of the operator, but also increases the risk of wire clamping of the outgoing line of the wiring.
Based on the above situation, it is imperative to develop the automatic wiring compensation system. After 3 years of research and development and continuous testing, the automatic wiring compensation system has achieved very ideal results. The biggest advantage of automatic wire arrangement controller is that it can monitor the change of winding diameter in real time to control the flatness of wire arrangement. Without manual intervention, the production is greatly improved, the influence of human factors on the wiring quality is eliminated, and the reliability of the wiring quality is guaranteed.
Technical Parameters
| Machine Specs | 24DHA06 | ||||||
| Inlet wire diameter | 0.60 - 1.20 mm | ||||||
| Outlet wire diameter | 0.08 - 0.32 mm | ||||||
| Speed | Max. 2500 m/min | ||||||
| Die No. | 24 | ||||||
| Traverse method | Flat belt | ||||||
| Take up motor | AC 4 | ||||||
| Wire elongation rate | 15% + 8.7% | ||||||
| Control type | PID dual inverter automatic control | ||||||
| Max copper load | 50 kgs | ||||||
| Take up spool | 300 mm | ||||||
| Power supply | 380V / 480V, 50Hz / 60Hz, 3 Phase | ||||||
Machine Photo
Download Center
Manual of Machine Purchase
Packing, Shipping, Quality & Service, FAQ etc.pdf
Our Company
Dongguan Wiremac Machinery Equipment Co., Ltd. Is located in Houjie Town, a famous historic town in China. Our company is a wire and cable equipment manufacturer integrating R&D, processing, assembly, commissioning and after-sales.
The company is committed to copper wire, copper clad steel, copper clad aluminum and other metal wire deep processing and research, with a variety of high quality machines: micro wire drawing machine, fine wire drawing machine, fine wire drawing machine with continuous annealing, medium fine wire drawing machine, intermediate wire drawing machine, intermediate RBD wire drawing machine and copper rod breakdown machine.
Our company provides a complete set of wire processing solutions for customers, but also customize and design non-standard special equipment according to the requirements of customers.
Our company upholds the spirit of “Honesty-based, Quality-based” enterprise, and continue to research and develop innovation and development, with professional skills and standardized pragmatic management, in line with the “High-quality and High-efficiency” business philosophy, from the overall planning, staff training, installation and commissioning, after-sales service, to provide customers with better and more satisfactory products and service.
Our Workshop
FAQ
1. Q: Are you manufacturer or trading company?
A: We are a manufacturer.
2. Q: What info you need before you make the proposal?
A: The input & output wire diameter, spool size, application, 3
phase voltage & frequency, annealing or not, and your other
requirement.
3. Q: How can I trust you and make a payment to you?
A: (1) We are an audited supplier by international SGS, with its
certificate. They approve that we are an original manufacturer and
meet their standard.
(2) We are a member of Made in China, who is always responsible for all customers.
(3) Please visit us and check our factory by video, and request necessary documents from us.
4. Q: I have no experience buying something abroad. What can I do?
A: We will guide and show you how to do the importation, you can
also seek help from your local agency.
5. Q: Do you provide installing and debugging overseas?
A: Overseas machine installation and worker training services are
available.
6. Q: Can you make the machine according to my design or prototype?
A: Yes, we have an experienced team for working out the most
suitable design and production plan for the machine that you are
going to book with us.
7. Q: How does your factory do regarding quality control?
A: There is zero tolerance to poor quality. Quality control
complies with SGS & ISO 9001. Every machine has to past testing
and trial running before it's packed for shipment.
8. Q: How can I trust you that machines pasted testing and trial
running before shipping?
A: 1) We record the testing videos for you, and every necessary
photos for you.
2) We welcome you to visit us and test machine by yourself in our
factory.
9. Q: What about our after-sale service?
A: We provide technical support on line as well as overseas
services by skillful technicians.
10. Q: What should I do if I just start a new business?
A: Contact us immediately, we provide free consultant pre-sales
service. Also we can help you with material purchase, worker
training, etc.
11. Q: Can I visit you factory to check machines on-site? What
Should I bring when I visit your factory?
A: We are manufacturer, and welcome customers to visit us. For
special product design, you are suggested to bring some samples,
you can test it with our machines on-site.
12. Q: Can I use my own logo?
A: No problem, please inform us.
