|
[China]
Trade Verify
Address: No.48, Baihao Industrial Street, Houjie Town, Dongguan City, Guangdong Province, China
Contact name:Andy
DONGGUAN WIREMAC MACHINERY EQPT. CO., LTD. |
|
Verified Suppliers
|
|
|
Cost Saving 16 Heads Multi Wire Drawing Machine With Online Annealing For Copper
Introduction
A 16 head wire drawing machine typically consists of the following main components:
Feeding System: The feeding system is responsible for feeding the original wire into the drawing machine for processing. It usually includes a coiler, wire guide system, and tension control device to ensure a stable supply of wire during the drawing process.
Drawing Section: The drawing section is the core component of a 16 head drawing machine. It consists of a series of drawing dies and pulling wheels. The wire gradually reduces its cross-sectional area through the tension between the mold and the traction wheel, thereby achieving diameter reduction and stretching of the wire.
Cooling and Lubrication System: The cooling and lubrication system plays an important role in the wire drawing process. It cools and lubricates the wire by spraying coolant and lubricants to reduce friction and heat accumulation, protect the surface of the wire, and reduce surface defects and damage.
Control System: The control system is responsible for monitoring and controlling the operation of the entire 16 head wire drawing machine. It is usually composed of PLC (Programmable Logic Controller) or other control equipment, which can adjust and optimize drawing parameters, monitor key indicators in the production process, such as tension, speed, and temperature, and perform real-time adjustment and feedback control to ensure stable production and consistent product quality.
Annealing Section: Some 16 head wire drawing machines are also equipped with online annealing systems. The annealing section usually includes a heating area and a cooling area to control the annealing temperature and cooling rate of the wire. Online annealing can eliminate the internal stress of the wire, improve the plasticity and mechanical properties of the wire.
Take-up System: The take-up system is responsible for receiving and winding the drawn wire. It usually includes a wire winding shaft, wire guide device, and wire winding machine to ensure that the wire is evenly wound and stored.
Technical Parameters
| Item | Value | ||||||
| Input diameter | 1.6 mm - 1.8 mm | ||||||
| Output diameter | 0.15 mm - 0.40 mm | ||||||
| Machine speed | Max 1800 m/min | ||||||
| Drawing dies | 24 x 16 | ||||||
| Die dimension | Φ25mm x 8 - 13mm (thickness) | ||||||
| Drawing wheel diameter | 100 mm | ||||||
| Take up reel capacity | Max 500 kgs | ||||||
| Annealing wheel diameter | 200 mm | ||||||
| Annealing current | 3800 A | ||||||
| Annealing voltage | DC 70V | ||||||
| Take-up motor power | 11kw AC motor | ||||||
| Take-up spool size | 500 / 630 mm | ||||||
| Power supply | 400V, 50Hz or 60Hz | ||||||
Machine Photo
Our Company
Dongguan Wiremac Machinery Equipment Co., Ltd. Is located in Houjie Town, a famous historic town in China. Our company is a wire and cable equipment manufacturer integrating R&D, processing, assembly, commissioning and after-sales.
The company is committed to copper wire, copper clad steel, copper clad aluminum and other metal wire deep processing and research, with a variety of high quality machines: micro wire drawing machine, fine wire drawing machine, fine wire drawing machine with continuous annealing, medium fine wire drawing machine, intermediate wire drawing machine, intermediate RBD wire drawing machine and copper rod breakdown machine.
Our company provides a complete set of wire processing solutions for customers, but also customize and design non-standard special equipment according to the requirements of customers.
Our company upholds the spirit of “Honesty-based, Quality-based” enterprise, and continue to research and develop innovation and development, with professional skills and standardized pragmatic management, in line with the “High-quality and High-efficiency” business philosophy, from the overall planning, staff training, installation and commissioning, after-sales service, to provide customers with better and more satisfactory products and service.
Our Workshop
FAQ
1. Q: Are you manufacturer or trading company?
A: We are a manufacturer.
2. Q: What info you need before you make the proposal?
A: The input & output wire diameter, spool size, application, 3
phase voltage & frequency, annealing or not, and your other
requirement.
3. Q: How can I trust you and make a payment to you?
A: (1) We are an audited supplier by international SGS, with its
certificate. They approve that we are an original manufacturer and
meet their standard.
(2) We are a member of Made in China, who is always responsible for all customers.
(3) Please visit us and check our factory by video, and request necessary documents from us.
4. Q: I have no experience buying something abroad. What can I do?
A: We will guide and show you how to do the importation, you can
also seek help from your local agency.
5. Q: Do you provide installing and debugging overseas?
A: Overseas machine installation and worker training services are
available.
6. Q: Can you make the machine according to my design or prototype?
A: Yes, we have an experienced team for working out the most
suitable design and production plan for the machine that you are
going to book with us.
7. Q: How does your factory do regarding quality control?
A: There is zero tolerance to poor quality. Quality control
complies with SGS & ISO 9001. Every machine has to past testing
and trial running before it's packed for shipment.
8. Q: How can I trust you that machines pasted testing and trial
running before shipping?
A: 1) We record the testing videos for you, and every necessary
photos for you.
2) We welcome you to visit us and test machine by yourself in our
factory.
9. Q: What about our after-sale service?
A: We provide technical support on line as well as overseas
services by skillful technicians.
10. Q: What should I do if I just start a new business?
A: Contact us immediately, we provide free consultant pre-sales
service. Also we can help you with material purchase, worker
training, etc.
11. Q: Can I visit you factory to check machines on-site? What
Should I bring when I visit your factory?
A: We are manufacturer, and welcome customers to visit us. For
special product design, you are suggested to bring some samples,
you can test it with our machines on-site.
12. Q: Can I use my own logo?
A: No problem, please inform us.
