|
[China]
Trade Verify
Address: No.48, Baihao Industrial Street, Houjie Town, Dongguan City, Guangdong Province, China
Contact name:Andy
DONGGUAN WIREMAC MACHINERY EQPT. CO., LTD. |
|
Verified Suppliers
|
|
|
Large Cable Winding and Packing Machine 5 to 15 MM Diameter Range
Features
1. Control part:
It adopts PLC automatic control system + man-machine interface operation screen, which can remember 99 groups of different packaging specifications. When changing coil specifications, the machine is free of adjustment, and all data are displayed on the man-machine interface screen at a glance; The electric control box and operation panel adopt modular design, which makes maintenance and replacement simple.
2. C-ring:
The C-ring is driven by the timing belt and plastic steel gear. The C-ring does not slip, the packaging is stable and the noise is low; The C-ring is made of special steel. The inner and outer rollers supporting the C-ring are covered with superior glue. The C-ring is not worn, the operation remains true and round, the service life is long, and overload protection is added, so that the motor is not easy to burn down.
3. Automatic arm mechanism:
Adopt four groups of electric arm adjustment, including the adjustment of coil outer diameter and the calibration of winding center point, which is convenient and fast; Four axis power wire holding ensures no slip and no out of round operation. The overlapping degree of packing belt can be adjusted.
4. Cutter:
The pneumatic cutter system is adopted, and the set length of packaging materials will be cut off automatically after coiling.
The cutter body can be serrated or scissors type (selected / replaced according to the needs of different packaging materials), and the blade surface is sharp,
The cutting belt is clean and neat. It can cut PVC, PP, PE plastic film, weaving and other packaging materials.
5. Clamping claw:
After the package is sent to the fixed point, it will be automatically clamped and pulled. After winding for 1.0 turns, the clamping claw will automatically retreat. When the winding reaches the set initial number of turns (1.5-2.5 turns), the clamping claw will automatically release the belt without any manual action, which has high safety.
6. Belt feeding device:
Pneumatic belt feeding device, lock free screw, fast belt changing, more convenient for installation.
7. Automatic label sending mechanism:
The whole stack label discharge type is adopted, and one label is automatically fed into each packaging line roll, which does not need manual work, is convenient and safe, saves time and improves the output.
8. Drive motor:
C-ring: 1 HP × 4P AC motor. (rotary packaging)
Wire holding arm: 1 HP × 4P a C motor + 1 / 20 reducer.
Technical Parameters
| Item | Specifications | ||||||
| Outer diameter of wrapping | 400mm～650mm | ||||||
| Internal diameter of wrapping | 140mm (minimum) | ||||||
| Height of wrapping | 50mm ~ 100mm | ||||||
| Weight of each packaged coil/roll | maximum 150kg | ||||||
| Spec of PVC / PE / PP adhesive film | 0.05mm～0.07mm thick x Width: 60mm ~ 70mm. | ||||||
| Loading method of film roll | pneumatic clamping | ||||||
| Operation panel | graphic operator interface | ||||||
| Coiling meters | can be set | ||||||
For more specifications, please contact us, thank you.
Our Company
Dongguan Wiremac Machinery Equipment Co., Ltd. Is located in Houjie Town, a famous historic town in China. Our company is a wire and cable equipment manufacturer integrating R&D, processing, assembly, commissioning and after-sales.
The company is committed to copper wire, copper clad steel, copper clad aluminum and other metal wire deep processing and research, with a variety of high quality machines: micro wire drawing machine, fine wire drawing machine, fine wire drawing machine with continuous annealing, medium fine wire drawing machine, intermediate wire drawing machine, intermediate RBD wire drawing machine and copper rod breakdown machine.
Our company provides a complete set of wire processing solutions for customers, but also customize and design non-standard special equipment according to the requirements of customers.
Our company upholds the spirit of “Honesty-based, Quality-based” enterprise, and continue to research and develop innovation and development, with professional skills and standardized pragmatic management, in line with the “High-quality and High-efficiency” business philosophy, from the overall planning, staff training, installation and commissioning, after-sales service, to provide customers with better and more satisfactory products and service.
Our Workshop
FAQ
1. Q: Are you manufacturer or trading company?
A: We are a manufacturer.
2. Q: What info you need before you make the proposal?
A: The input & output wire diameter, spool size, application, 3
phase voltage & frequency, annealing or not, and your other
requirement.
3. Q: How can I trust you and make a payment to you?
A: (1) We are an audited supplier by international SGS, with its
certificate. They approve that we are an original manufacturer and
meet their standard.
(2) We are a member of Made in China, who is always responsible for all customers.
(3) Please visit us and check our factory by video, and request necessary documents from us.
4. Q: I have no experience buying something abroad. What can I do?
A: We will guide and show you how to do the importation, you can
also seek help from your local agency.
5. Q: Do you provide installing and debugging overseas?
A: Overseas machine installation and worker training services are
available.
6. Q: Can you make the machine according to my design or prototype?
A: Yes, we have an experienced team for working out the most
suitable design and production plan for the machine that you are
going to book with us.
7. Q: How does your factory do regarding quality control?
A: There is zero tolerance to poor quality. Quality control
complies with SGS & ISO 9001. Every machine has to past testing
and trial running before it's packed for shipment.
8. Q: How can I trust you that machines pasted testing and trial
running before shipping?
A: 1) We record the testing videos for you, and every necessary
photos for you.
2) We welcome you to visit us and test machine by yourself in our
factory.
9. Q: What about our after-sale service?
A: We provide technical support on line as well as overseas
services by skillful technicians.
10. Q: What should I do if I just start a new business?
A: Contact us immediately, we provide free consultant pre-sales
service. Also we can help you with material purchase, worker
training, etc.
11. Q: Can I visit you factory to check machines on-site? What
Should I bring when I visit your factory?
A: We are manufacturer, and welcome customers to visit us. For
special product design, you are suggested to bring some samples,
you can test it with our machines on-site.
12. Q: Can I use my own logo?
A: No problem, please inform us.
