|
[China]
Trade Verify
Address: Room 1901, Block A, Saigao District Building, Feng Cheng Five Road, Xi 'an Economic and Technological Development Zone, Shaanxi Province
Contact name:Selina Qiang
Ruixin Energy Equipmnet |
|
Verified Suppliers
|
|
|
API Sealing GIH Grease Injection Head For Braided Cable Wireline
Grease Injection System Wireline Pressure Control
Grease Injection Head (GIH) is a sealing device designed for use on braided cable wireline operation. Positioned on top of the Lubricators, GIH effectively contains wellpressure by pumping grease into the flow tube, forming a liquid sealing that contains the well fluids and at the same time provides lubrication to the braided cable while running into and out of the well. The grease injection outlet port provides an exit for excessive or dirty grease, allowing new grease to be pumped in through the inlet port.
Thread | Seal Diameter | WP(psi) | Flow Tubes | Wire Szie | Service |
|
4-3/4"-4ACME | 3.750" | 5000 | 3/4/5 |
| STD |
|
5"-4ACME | 3.500" | 5000 | 3/4/5 |
| STD |
|
5-3/4"-4ACME | 4.000" | 10000 | 3/4/5 |
| H2S |
|
6-1/2“-4ACME | 4.750" | 5000 | 3/4/5 |
| STD |
|
8-3/8"-4ACME | 5.250" | 10000 | 3/4/5 |
| H2S |
|
Welcome to contact us at any time.
