Pump-In-Tee Wireline Pressure Control Equipment
Ⅰ.Introduction
The Pump in tee is attached below the BOP,The pump in tee
connection thread is used to connect the wellhead manifold to
provide a path for large flow. NPT thread hole on the other side of
the tee body is a pressure release valve . After installing the pressure release valve, it can be used for pressure relief to ensure safe operation.
II. General Technical Parameters
Bore | Work Pressure | Service | Connection | PN |
2.5" | 5K 10K | Std H2S | 5"-4ACME | S0*-0*.0*.00 |
3" | 5K | H2S | 5"-4ACME | S0*-0*.0*.00 |
3" | 10K | Std | 5"-4ACME | S0*-0*.0*.00 |
3" | 10K | Std H2S | 5-3/4"-4ACME | S0*-0*.0*.00 |
2.5" | 15K | H2S | 5-3/4"-4ACME | S0*-0*.0*.00 |
4" | 5K 10K | Std | 6-1/2"-4ACME | S0*-0*.0*.00 |
3" | 15K | Std H2S | 7-1/2"-4ACME | S0*-0*.0*.00 |
5" | 5K | Std H2S | 8-1/4"-4ACME | S0*-0*.0*.00 |
4" | 10K | Std H2S | 8-3/8"-4ACME | S0*-0*.0*.00 |
5" | 5K 10K | Std H2S | 9"-4ACME | S0*-0*.0*.00 |
4" | 15K | Std H2S | 9-1/2"-4ACME | S0*-0*.0*.00 |
6.38" | 10K | Std H2S | 11-1/2"-4ACME | S0*-0*.0*.00 |
Ⅲ. Features
The Pump in tee is composed of a body, a nonunion plug, a nonunion
nut (standard part), a slip and a nonunion nut.The body is a
pressure member, and the material is 4140,Through forging,
tempering treatment, mechanical properties test and ultrasonic
testing, to ensure that meet the requirements of use.The nut and
the slips are fixed by the top wire and play the connecting role.
Ⅳ. Pressure Testing:
1. Install the pressure test connector and connect the pressure
test line;
2. Start the pressure test pump to carry out the pressure test.
Refer to the specific specifications and
drawings for the test pressure and time. Fill in the test record
card.
Ⅴ. Daily Maintenance
1.After use, the O-ring and seal should be replaced;
2.When not in use, should take the protector and brush the thread
with anti-rust oil for storage.
◆About Baoji RuiXin Slickline Tools
Baoji Ruixin Energy Equipment Co., Ltd. was established in 2012. It
is an IS0: 9001-2015 and API Q1 system certified technology
research and development organization specializing in the design
and manufacture of steel wire, cable and coiled tubing tools. With
strong new product research and development capabilities, it has
obtained 12 national utility model patent certificates and 1
invention patent certificate. Undertook two prefecture-level and
provincial-level scientific research projects. Our products include
wireline wireline wellhead blowout prevention equipment, wireline
downhole tools and coiled tubing downhole tools. At present, we
have provided professional equipment and technical support to more
than 50 oilfield service companies in various regions at home and
abroad.
◆Strict quality control system
Steel wire working tools are certified by API, and all
manufacturing are strictly in accordance with API system, including
quality control management, environmental management and
occupational health and safety management. For each wire working
tool and each part, we have achieved traceability from raw
materials, production process to product shipment.
◆Hard work, after-sales service
On-site technical guidance exchanges with each other. Our sales and
technical personnel communicated well with front-line engineers and
technical experts on the job site, and solved technical problems
such as material selection, sealing structure optimization, and
accident handling in complex environments. And carried out many
technical exchanges and friendly cooperation. We have done a good
job of product after-sales service for customers, and we provide
customers with more satisfactory services. We would like to thank
more and more customers for their support and trust. In the future,
we will do better.