Anping County Hengyuan Hardware Netting Industry Product Co.,Ltd. |
Verified Suppliers
|
|
Pure Round Water Well Sand Screen Non - Angular Corner 5.8M Length
Johnson Wire Screen Product Description:
Johnson Screens is manufactured with V-shaped profile wire which is spirally wound around a cage of longitudinal support rods. Each intersecting point of these wires is fusion welded. The pitch of winding gives different spacing between two adjacent turns of wire. This spacing gives passage for water to enter. The entire process is completed on fully computerized machines.
Johnson Wire Screen Specificarion:
Material | Stainless steel |
Grade | 304 316L |
O.D | Min. 32mm Max.1270mm |
Size | 2" 3" 4" 5" 6" 8" 9" 10" 12" 14" 16" |
Length | 100-6000mm |
Solt size | 0.1-30 mm |
End connection | Welded rings/ Nothing / Thread coupling |
Wire size | 63# 93 # 118# |
Support rod | 120# 140 # 170# 200# |
Wire shape | V shape |
Johnson Wire Screen Characteristic:
1. Screens with high open area are more suitable for the
construction of high-quality water wells, oil wells and gas wells.
2. Low cost operation Screens with high open area shall favor
groundwater infiltration. Abundant water shall reduce the water
level’s down, thus to save energy consumption.
3. Reduce the abrasion of the pump
Under the same condition, high open area can make the speed of
groundwater’s entering into the screen much slower than any other
filtration apparatus, which will avoid sand’s entering into screen
because of high pressure, thus reduce the abrasion of the pump.
4. Extend the life span of wells
Comparatively, groundwater’s entering into screen with higher open
area is much easier than the entering into lower open area screen.
The slow water flow shall extend the life span of wells.
Johnson Wire Screen Regular Specification:
SIZE (INCH) | O.D (MM) | SLOT (MM) | LENGTH (M) | COLLAPSE STRENGTH (BAR) | TENSILE WEIGHT (TON) | WRAP WIRE(WIDTH*HEIGHT) (MM) | RODS (MM) |
3-1/2 | 88.9 | 1.0 | 3 | >22 | 10.2 | 2.3*3.5 | 3.8MM/22 |
4-1/2 | 114.3 | 1.0 | 3 | >28 | 11.5 | 2.3*3.5 | 3.8MM/22 |
6-5/8 | 168.3 | 0.75 | 5.8 | >40 | 12.8 | 2.3*3.5 | 3.8MM/32 |
6-5/8 | 168.3 | 1.0 | 5.8 | >33 | 12.8 | 2.3*3.5 | 3.8MM/32 |
6-5/8 | 168.3 | 0.63 | 5.8 | >83 | 45 | 3.2*6.0 | 6.0MM*32 |
8-5/8 | 219.1 | 1.0 | 5.8 | >34 | 21.9 | 2.3*3.5 | 3.8MM/48 |
8-5/8 | 219.1 | 1.0 | 5.8 | >50 | 38.2 | 3.0*5.0 | 4.0MM/48 |
8-5/8 | 219.1 | 1.0 | 5.8 | >60 | 46 | 3.2*6.0 | 5.0MM/48 |
10-3/4 | 273.1 | 0.75 | 5.8 | >50 | 32.9 | 2.3*3.5 | 4.9MM/55 |
10-3/4 | 273.1 | 1.0 | 5.8 | >60 | 39.5 | 3.0*5.0 | 4.9MM/55 |
10-3/4 | 273.1 | 1.0 | 5.8 | >100 | 48 | 3.2*6.0 | 5.0MM/55 |
12-3/4 | 323.9 | 1.0 | 5.8 | >120 | 37.2 | 3.0*5.0 | 4.0MM/50 |
14 | 355.6 | 1.0 | 3 | >80 | 37.8 | 3.0*5.0 | 4.0MM/59 |
Johnson Wire Screen Use:
water well
water supply systems
Refining & petrochemical
Filter equipment
Drum Filter
Sand control
Johnson Wire Screen OEM service:
We can produce products according to the needs of our customers.
Material: stainless steel 304, 316L, low carbon steel
Diameter: minimum diameter 32mm, maximum diameter 1270mm
Length: single tube can be up to 6 meters in length
Gap: 0.25mm, 0.5mm, 0.7mm, 1.0mm, 1.5mm is a regular gap. We can
produce gaps of 0.1-50mm
Joints: Generally, there are joints at both ends of the pipe, such
as flanges, weld rings, or threads, so that the pipes can be
connected to meet the needs of use.
Johnson Wire Screen Pictures: