Anping County Hengyuan Hardware Netting Industry Product Co.,Ltd. |
Verified Suppliers
|
|
Corrosion Resistance Water Wire Screen / Stainless Steel Well
Screens For Coal / Mine
Water Wire Screen Product Description:
1: Water Wire Screen substitute for Johnson type water well
screen is the continuous slot,
2: designed to provide maximum open are to reduce entrance
velocity, increase hydraulic efficiency and promote more effective
development.
3: Both the inner and outer screens shall be constructed of
V-shaped wire continuously wrapped around an array of equally
spaced support rods of the same material.
4: Each junction of wire/rod contact shall be resistance
welded.The wrapped wire is V shape, and the support rod is O shape.
Filter from outside to inside.
Water Wire Screen Use:
Johnson water well screen has been known as the world's leading
manufacturer and provider of industrial filters since 1904.We
provide screening solutions to almost every industry,including:
· Water Well
· Waste Water Treatment
. Water supply systems
· Coal & Mine
· Food Processors & Beverage Screens
· Environmental protection
· Refining & Petrochemical
· Architecture & Construction
Water Wire Screen Specificarion:
Material | Stainless Steel |
Grade | 201, 205, 304, 304L, 316L |
O.D | 219 mm, 273mm |
Size | 8 ", 10" |
Length | 2.9m, 5.8 m |
Solt size | 0.5mm, 0.75mm, 1.0 mm,1.5mm" |
End connection | Welded rings |
Wire size | 2*3.5mm, 2.2*3.5mm, 3*4.6mm, 3*5mm, 3*6mm, 3*7mm |
Support rod | round wire ø3.0-5.0mm |
1. The Vee shaped wire, make the hole of screen outside face is
smaller than inside, so the hole is hard to jam.
2. The numerical control machine tools strictly control the
gap between the wire, so that the gap is even.
3. Stainless steel 304L have the high corrosion resistance
Water Wire Screen Regular Specification:
SIZE | O.D | SLOT | LENGTH | COLLAPSE | TENSILE | WRAP WIRE(WIDTH*HEIGHT) | RODS |
3-1/2 | 88.9 | 1.0 | 3 | >22 | 10.2 | 2.3*3.5 | 3.8MM/22 |
4-1/2 | 114.3 | 1.0 | 3 | >28 | 11.5 | 2.3*3.5 | 3.8MM/22 |
6-5/8 | 168.3 | 0.75 | 5.8 | >40 | 12.8 | 2.3*3.5 | 3.8MM/32 |
6-5/8 | 168.3 | 1.0 | 5.8 | >33 | 12.8 | 2.3*3.5 | 3.8MM/32 |
6-5/8 | 168.3 | 0.63 | 5.8 | >83 | 45 | 3.2*6.0 | 6.0MM*32 |
8-5/8 | 219.1 | 1.0 | 5.8 | >34 | 21.9 | 2.3*3.5 | 3.8MM/48 |
8-5/8 | 219.1 | 1.0 | 5.8 | >50 | 38.2 | 3.0*5.0 | 4.0MM/48 |
8-5/8 | 219.1 | 1.0 | 5.8 | >60 | 46 | 3.2*6.0 | 5.0MM/48 |
10-3/4 | 273.1 | 0.75 | 5.8 | >50 | 32.9 | 2.3*3.5 | 4.9MM/55 |
10-3/4 | 273.1 | 1.0 | 5.8 | >60 | 39.5 | 3.0*5.0 | 4.9MM/55 |
10-3/4 | 273.1 | 1.0 | 5.8 | >100 | 48 | 3.2*6.0 | 5.0MM/55 |
12-3/4 | 323.9 | 1.0 | 5.8 | >120 | 37.2 | 3.0*5.0 | 4.0MM/50 |
14 | 355.6 | 1.0 | 3 | >80 | 37.8 | 3.0*5.0 | 4.0MM/59 |