Active Member
|
[China]
Address: 289 Yellow River Road, Xinxiang City, Henan Province, China
Contact name:Wang
Henan Pingyuan Mining Machinery Co., Ltd |
|
|
Food Rotex Sweco Cereal Rotary Vibrating Sieve Machine Nut Vibration Separator
Introduction
Rotex Sweco Cereal Rotary Vibrating Sieve Machine Nut Vibration
Separatoris a sort of high precision powder screening machine,
the advantages are:low noise, high efficiency, fast network
required for 3-5 minutes, fully enclosed structure, it is suitable
for sieving and filtering grain, powder and mucus material. The
vibration source of rotary vibration sieve is vertical motor, the
motor is installed with upper and lower eccentric weight at both
ends,changing the motor rotary motion into horizontal, vertical,
and inclined motions,hence the movement is transferred to the
screen surface.
What’s more,the material trajectory on the sieve surface can be adjusted by changing the phase angle of motor upper and lower heavy weights.
Working Principle
The vibration is accomplished by eccentric weights on the upper and
lower ends of the motion-generator shaft. The direction of the
eccentric weights can change its rotational mode,rotation of the
upper weight creates vibration in the horizontal plane, which
causes material to move across the screen cloth to the
periphery,while the lower weight acts to tilt the machine, causing
vibration in the vertical and tangential planes. The trajectories
of materials on the screen can be changed by adjusting the phase
angle of upper and lower weights.
Advantages and Features
1. Enclosed design, good sealing, zero dust pollution, environmental friendly
2. Unique screen frame design, convenient and easy for dismounting
3. Discharge outlet can be adjusted to any direction based on client’s need
4. Low energy consumption,low noise pollution,smooth operation,high sieving efficiency
5. Bouncing balls are provided to prevent blockage of the screen mesh
6. The amplitude and motion of the material are adjustable to meet various requirement
7. Material distributor available at inlet section to ensure evenly distribution on the screen
8. Complete models with different machine diameters to satisfy various capacity requirement
9. Inspection hatch can be provided to observe material distribution and running status
10. Vibrating motor brand can be domestic or imported as per your requirement
Technical Parameters
| Model | Nominal Diameter(mm) | Screen Diameter(mm) | Screen Surface Area(m3) | Feeding size (mm) | Specification | NO. of Layers | Frequency(rpm) | Power(Kw) |
| XZ-400 | 400 | 340 | 0.09 | <10 | 2-325 | 1-5 | 1500 | 0.18 |
| XZ-600 | 600 | 530 | 0.22 | <10 | 0.25 | |||
| XZ-800 | 800 | 720 | 0.4 | <20 | 0.55 | |||
| XZ-1000 | 1000 | 900 | 0.63 | <20 | 0.75 | |||
| XZ-1200 | 1200 | 1100 | 0.95 | <20 | 1.1 | |||
| XZ-1500 | 1500 | 1400 | 1.5 | <20 | 1.5 | |||
| XZ-1800 | 1800 | 1710 | 2.3 | <30 | 2.2 | |||
| XZ-2000 | 2000 | 1910 | 2.86 | <30 | 3.7 |
Note: the parameter above is just for reference,it can be
customized by different requirment.
Selection Conditions
♦ Material to be processed:
| ♦ Screen layer/deck/sieve number:
|
♦ Bulk density: t/m3 | ♦ Mesh size of every screen layer/deck/sieve: mm |
♦ Material Temperature: ºC | ♦ Upstream equipment (what kind of equipment is used to feed the material): |
♦ Water Content: % | ♦ Downstream equipment (what kind of equipment is used to discharge the material): |
♦ Material is corrosive or not: (Yes or No) | ♦ Construction material: (Carbon steel, SS304, SS316L or any special requirements) |
♦ Material is sticky or not: (Yes or No) | ♦ Working environment: (indoor or outdoor) |
♦ Granule size of material: mm | ♦ Working environment temperature: °C |
♦ Max. granule size: mm | ♦ Working power supply: 3 Phase V Hz |
♦ Particle distribution percentage:
| ♦ Quantity: sets |
♦ Handling capacity: t/h |
