Active Member
|
[China]
Address: 289 Yellow River Road, Xinxiang City, Henan Province, China
Contact name:Wang
Henan Pingyuan Mining Machinery Co., Ltd |
|
|
Introduction
High Accuracy Ultrasonic Fine Sugar Sieving Machine Rotary
Vibration Sieve is a new type and high precision fine powder sieving machine with
characteristics of high efficiency & lower noise. The
fundamental principle of round separator is that the eccentric
hammers installed on the top and bottom ends of motor changes the
rotation motion of motor to horizontal, vertical and inclined
three-dimensional motions, and then passes this motion to screen
surface, achieving the purpose of classification, filtering and
removal of impurities.
Working Principle
The vibration of Ultrasonic Vibrating Screen is produced by
eccentric weights on the upper and lower ends of the
motion-generator shaft. The direction of the eccentric weights can
change its rotational mode,rotation of the upper weight creates
vibration in the horizontal plane, which causes material to move
across the screen cloth to the periphery,while the lower weight
acts to tilt the machine, causing vibration in the vertical and
tangential planes.
Advantages and Features
1. Various material separation range- power or particle,wet or dry,
heavy or light,coarse or fine, hot or cold.
2. Various size range-available diameter from 400mm to
2000mm,mesh size can reach 500 mesh ( 0.028 mm).
3. Environmentally Friendly- Fully enclosed structure,no dust
pollution,improve working conditions for operators as well.
4. Quick Screen Changes-Quick release device is provided to replace
the screen with 5 minutes.
5. Automatic screen cleaning-bouncing balls keep screen openings
clean and maintain a good efficiency.
6. Customized order- Rotary vibrating screen can be customized
according to customer's demand.
7. Unique design-Mature technology,compact and simple
structure,convenient installation and maintenance.
8. Wide application-Rotary vibrating screen is applicable to any
powder, granule, particle and mucus.
Technical Parameters
| Model | Nominal Diameter(mm) | Screen Diameter(mm) | Screen Surface Area(m3) | Feeding size (mm) | Specification | NO. of Layers | Frequency(rpm) | Power(Kw) |
| XZ-400 | 400 | 340 | 0.09 | <10 | 2-325 | 1-5 | 1500 | 0.18 |
| XZ-600 | 600 | 530 | 0.22 | <10 | 0.25 | |||
| XZ-800 | 800 | 720 | 0.4 | <20 | 0.55 | |||
| XZ-1000 | 1000 | 900 | 0.63 | <20 | 0.75 | |||
| XZ-1200 | 1200 | 1100 | 0.95 | <20 | 1.1 | |||
| XZ-1500 | 1500 | 1400 | 1.5 | <20 | 1.5 | |||
| XZ-1800 | 1800 | 1710 | 2.3 | <30 | 2.2 | |||
| XZ-2000 | 2000 | 1910 | 2.86 | <30 | 3.7 |
Note: the parameter above is just for reference,it can be
customized by different requirment.
Selection Conditions
| ♦Material to be processed: _____ | ♦Max. granule size of the feeding material: _____mm |
| ♦Handling capacity (Ps. It means the total | ♦Layer number: ______ |
| material capacity feeding from the inlet): _____t/h | ♦Mesh size of each layer: _____mm |
| ♦Bulk Density: _____t/m3 | ♦Particle distribution percentage:____________ |
| ♦Material temperature: _____ºC; | (please check the following example to help you |
| ♦water content:____% | understand it.Supposing the layer number is 2 |
| ♦Material is corrosive or not: ____ (Ps. Yes or No) | and the aperture size of each layer is 10mm and 5mm, |
| ♦Material is sticky or not: ____ (Ps. Yes or No) | then you will get 3 kinds of products: X,Y and Z. |
| ♦Working environment is indoor or outdoor: _____ | X≥10mm; 5mm≤ Y < 10mm; Z<5mm. |
| ♦Working environment temperature: ______ ºC | We want to confirm the following information: |
| ♦Upstream equipment (Ps. It means what kind of | 1)The percentage of X in the whole material:_____%; |
| equipment is used to feed the material): _____ | 2)The percentage of Y in the whole material:_____%; |
| ♦Downstream equipment (Ps. It means what kind of | 3)The percentage of Z in the whole material:_____%;) |
| equipment is used to discharge the material): _____ | ♦Working power supply: _____V ______HZ |
