Active Member
|
[China]
Address: BLOCK 64 FUMIN INDUSTRY ,PINGHU TOWN,LONGGANG DISTRIC ,SHENZHEN CITY
Contact name:LISA XIAO
SHENZHEN JOINT TECHNOLOGY CO.,LTD |
|
|
Characteristics:
1. Independent spindle, through hoe is Ø87mm or Ø105mm
2. Motor direct drive with variable speed
3. Optional: 3-shift automatic gear-box, big torque output (801Nm/7.5kw)
4. Optimized structure, high rigidity, good accuracy and super stability
Parameters sheet:
| Item | Unit | Model | ||
| Main parameters | Max swing diameter over bed (mm) | mm | 520 | |
| Center distance | mm | 750/1000/1500 | ||
| Max turning dia | Disk | mm | 500 | |
| Axis | mm | 315 | ||
| Max swing over slide | mm | 315 | ||
| Spindle and chuck parameters | Spindle speed range (automatic change) | Low speed | rpm | 24-240 |
| Medium speed | 70.5-705 | |||
| High speed | 250-2500(max) | |||
| Spindle max output torque | NM | 801(7.5kw) with gear-box | ||
| Spindle nose type | Type | A2-8 | ||
| Through bar diameter | mm | Ø87/(optional Ø105) | ||
| Feed part parameters | Manual chuck and through hole | mm | Ø250(Ø80) | |
| Spindle motor power | kw | 7.5/11/15 inverter motor | ||
| Z axis guideway span | mm | 390 | ||
| X axis guideway span | mm | 210 | ||
| X axis travel | mm | 295 | ||
| Z axis travel | mm | 750/1000/1500 | ||
| X,Z axis rapid feed speed | m/min | 4/8 | ||
| Track | X axis linear guide way spec | NM | 6 | |
| Z axis linear guide way spec | NM | 10( bed over 1500) | ||
| Knife tower | Electric tool rest form | Type | 4 positions vertical type (optional with 6 positions horizontal type or gantry type) | |
| Tool specification | mm | 25*25 | ||
| Tailstock | Tailstock quill diameter | mm | Ø75 | |
| Tailstock quill travel | mm | 120 | ||
| Tailstock quill taper | mm | MT-#5 | ||
| Other | Machine dimension | m | 2.4/2.7/3.2*1.6*1.7 | |
| Package dimension | m | 2.6/2.9/3.4*1.8*2.1 | ||
| Gross weight | T | About 3.1/3.3/3.7 | ||
Standard accessories:
1. GSK TC3 control system; 7.5kw inverter speed spindle motor
2. Spindle three speed manual gearbox transmission; Ø82 spindle hole diameter
3. 4 positions tool turret
4. tool and toolbox
5. leveling pad
6. Ø250 manual 3-jaw chuck
7. Fully closed cover
8. Auto lubrication system
9. Cooling system
10. Hand unit
11. Working light
12. Manual tailstock
13. Technical documents
Optional accessories:
1. 6 positions tool turret
2. Hydraulic tailstock
3. Manual solid chuck change to solid hydraulic chuk
4. Solid hydraulic chuck change to hollow hydraulic chuck
5. FANUC system
Fuselage construction:
Overview:
